Desa CTDV36NRA, VT36PA Installing Optional Wall Mount Switch GWMS2, Installing Remote Receiver

Page 21

FIREPLACE INSTALLATION

Checking Gas Connections (Cont.) Installing Optional Wall Mount Switch - GWMS2 Installing Optional Wireless Hand-Held Remote Control - GHRC and GHRCT(A) Series

21

FIREPLACE INSTALLATION

Continued

Pressure Testing Fireplace Gas Connections

1.

Open equipment shutoff valve (see Figure 33, page 20).

2.

Open propane/LP supply tank valve for propane/LP fireplace

 

or main gas valve located on or near gas meter for natural gas

 

fireplace.

3.

Make sure control knob of fireplace is in the OFF position.

4.

Check all joints from equipment shutoff valve to gas valve (see

3.Locate the battery clip mounted on the back of the receiver. Slide a 9-volt alkaline battery (not included) through the clip (see Figure 36).

4.Attach the terminal wires to the battery.

5.Connect wires from receiver to TH and TPTH to control valve (see Figure 38).

6.Replace the switch bracket.

 

Figure 34 for propane/LP or Figure 35 for natural gas, page 20).

 

Apply noncorrosive leak detection fluid to all joints. Bubbles

 

forming show a leak. Correct all leaks at once.

5.

Light fireplace (see Operating Fireplace, pages 25 through

 

27). Check all other internal joints for leaks.

6.

Turn off fireplace (see To Turn Off Gas to Appliance, page 25).

INSTALLING OPTIONAL WALL MOUNT SWITCH - GWMS2

1. Connect one terminal of 25 ft. wire for the wall switch to the

Receiver

9-Volt Alkaline Battery

Terminal

Wires

Battery Clip

Figure 36 - Attaching Alkaline Battery to Receiver

To Optional

Remote

Accessory

Figure 38 - Connecting Remote Accessory to Control Valve

 

TPTH terminal on the valve. Connect remaining wire terminal

 

to the TH terminal on the valve. Make sure that the wire termi-

 

nals are in the positions on the unit as pictured in Figure 36. If

 

wires are not connected as shown the switch will not work.

2.

Route the 25 ft. wire through openings provided on the sides of

 

the burner system to a convenient location to mount your switch.

3.

Connect one bare wire end to each of the terminals of the

 

GWMS2 wall switch.

4.

Install the wall switch and cover in the wall.

To Wall Switch

Accessory

Installing 9-Volt Alkaline Battery in Hand-Held Remote Control Unit

1.Remove battery cover on back of remote control unit.

2.Attach terminal wires to a 9-volt alkaline battery (not included). Place battery into the battery housing.

3.Replace battery cover onto remote control unit.

 

Battery Cover

Remote

Terminal

 

 

Control Unit

Wires

 

 

9-Volt Alkaline Battery

Battery

Housing

Figure 36 - Connecting Wall Swith to Control Valve

INSTALLING OPTIONAL WIRELESS HAND- HELD REMOTE CONTROL - (C)GHRC AND (C)GHRCTA SERIES

NOTICE: Use only alkaline batteries (not included).

Figure 39 - Installing Alkaline Battery in Hand-Held Remote Control Unit ([C]GHRC)

 

Terminal

9-Volt

Wires

 

Battery

 

Installing Remote Receiver

1.Open bottom louver and locate the switch bracket on the left.

2.Unscrew the switch bracket. Lean bracket forward so you are able to access the back of the remote receiver.

Battery Cover

Remote

Control

Unit

Figure 40 - Installing Battery in Hand-Held Remote Control Unit

([C]GHRCTA Series)

For morevisit www..com

111250-01A

Page 20 Page 22
Image 21
Page 20 Page 22
Contents For Your Safety What to do if YOU Smell GAS For Your SafetySafety Information Table of ContentsLocal Codes Safety Information Product IdentificationProduct Features PRE-INSTALLATION PreparationLocation and Space Requirements Framing and Finishing ClearancesBalcony with Perpendicular Side Wall Location of Termination CAPInstallation Precautions Venting Installation InstructionsInstallation Planning Horizontal Termination InstallationVent Pipe Connections Installing Horizontal Vent Cap Noncombustible Exterior Square Termination Horizontal Termination ConfigurationsCorner and Alternate Installation Venting with Two 90 Elbows Horizontal System Installation Using TWO ElbowsFlat Ceiling Installation Installation for Vertical TerminationVenting with One 90 Elbow Vertical Termination ConfigurationsVertical Venting High Altitude InstallationParts Lists for Venting Kits and Components Fireplace InstallationInstalling Optional Blower Accessories Check GAS TypeAttaching Speed Control to Firebox Model BKT InstallationBlower Model BKT Blower Wiring DiagramInstallation Items Needed Installing GAS Piping to Fireplace LocationInstallation Items Needed Connecting Fireplace to GAS SupplyPressure Testing Gas Supply Piping System Checking GAS ConnectionsInstalling Optional Wall Mount Switch GWMS2 Pressure Testing Fireplace Gas ConnectionsInstalling Remote Receiver REMOVING/REPLACING Glass Door Cleaning Glass DoorRemoving Louver Panels Removing Glass DoorInstalling Left Side Brick Panel Installing LOGS, Lava Rock and Glowing EmbersInstalling Logs No and No Manual Lighting Procedure For Your Safety Read Before LightingOperating Fireplace Lighting InstructionsOptional HAND-HELD Remote Operation Thermostat Series Model GhrctbON/OFF Series Model Ghrcb Pilot Assembly Operating Optional Blower AccessoryInspecting Burners Operating Optional GWMT1 Wall Mounted ThermostatGlass Door Cleaning and MaintenancePilot and Burners LogsObserved Problem Possible Cause TroubleshootingObserved Problem Possible Cause Remedy Above Gas leak. See Warning statementIllustrated Parts Breakdown VT36PRA, VT36PRBACTDV36NRA VT36PA, VT36PBA, VT36PRA, VT36PRBA, CTDV36NRA Parts ListService Hints Replacement PartsTechnical Service SpecificationsOwners Registration Form Postage Required Flexible GAS Line Connector GA5081 AccessoriesPROPANE/NATURAL GAS Conversion KIT Manual Blower KIT BKWarranty Information

VT36PA, CTDV36NRA, VT36NA specifications

The Desa VT36NA, CTDV36NRA, and VT36PA are popular models in the realm of gas fireplaces, providing efficient heating solutions while enhancing the aesthetic appeal of any space. These models are designed to deliver comfort, convenience, and sophisticated design, making them ideal choices for residential and commercial applications.

One of the standout features of these models is their innovative heating technology. Utilizing advanced gas control systems, they offer precise temperature management, allowing users to enjoy consistent warmth with ease. The inclusion of a variable speed blower ensures better air circulation, maximizing the heating efficiency and comfort level throughout the room.

The VT36NA model boasts a direct vent design, which means it draws air for combustion from outside, ensuring that indoor air quality remains untainted. This feature is particularly beneficial in tightly sealed homes where indoor air quality can be compromised. The dual venting option also provides flexibility in installation, allowing for either horizontal or vertical venting, which adds to the model's versatility.

The CTDV36NRA, on the other hand, is designed with a contemporary aesthetic in mind, featuring a sleek and modern front that complements any modern décor. With a variable flame height option, users can easily adjust the fire intensity according to their preferences, providing both ambiance and warmth. The accent lighting feature further enhances the visual appeal, allowing the fireplace to become a focal point in any room.

The VT36PA model is equipped with enhanced safety features, including an automatic shut-off system and flame supervision devices. These safety measures provide peace of mind while operating, ensuring that the fireplace is both effective and secure for regular use. Additionally, the model is capable of using either natural gas or propane, adding versatility to fuel options depending on user preference or availability.

In terms of energy efficiency, all three models meet rigorous standards, making them environmentally friendly options for heating. With their low emissions and high-efficiency ratings, they contribute to reducing overall energy consumption.

Overall, the Desa VT36NA, CTDV36NRA, and VT36PA models offer a blend of functionality, modern technology, and aesthetic appeal. With their range of features and customizable options, they are ideal for those looking to enhance their living spaces with reliable heating solutions that also serve as elegant focal points. Whether for a cozy family gathering or a modern entertainment area, these fireplaces provide both comfort and style, making them excellent additions to any home.
Top Page Image Contents