Desa M36E, M42E, VM36E, VM42E, H) AND VM42E(B Top, Gas leak. See Warning statement at

Page 21

TROUBLESHOOTING

TROUBLESHOOTING

Continued

WARNING: If you smell gas

•Shut off gas supply.

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

IMPORTANT: Operating fireplace where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors.

OBSERVED PROBLEM

POSSIBLE CAUSE

REMEDY

21

Fireplace produces a clicking/ticking noise just after burner is lit or shut off

1.Metal expanding while heating or con- tracting while cooling

1.This is common with most fireplaces. If noise is excessive, contact qualified ser- vice person

Fireplace produces unwanted odors

1.

Fireplace burning vapors from paint, hair

 

 

spray, glues, etc. (See IMPORTANT

 

 

statement above)

 

2.

For propane/LP gas, low fuel supply

 

3.

Gas leak. See Warning statement at

 

 

top of page

1.Ventilate room. Stop using odor caus- ing products while fireplace is running

2.Contact local propane/LP supplier

3.Locate and correct all leaks (see Gas Line Hook-Up, pages 11 and 12)

Gas odor even when control knob is in OFF 1.

Gas leak. See Warning statement at

1.

Locate and correct all leaks (see Gas

position

top of page

 

Line Hook-Up, pages 11 and 12)

2.

Control valve defective

2.

Replace control valve

Gas odor during combustion

1.

Foreign matter between control valve

 

 

and burner

 

2.

Gas leak. See Warning statement at

 

 

top of page

1.Take apart gas tubing and remove for- eign matter

2.Locate and correct all leaks (see Gas Line Hook-Up, pages 11 and 12)

Dark residue on logs or inside of fireplace

1.

Improper log placement

1.

Properly locate logs (see log placement

 

 

 

 

sections on pages 13 and 14)

 

2.

Air holes at burner inlet blocked

2.

Clean out air holes at burner inlets. Pe-

 

 

 

 

riodically repeat as needed

 

3.

Burner flame holes blocked

3.

Remove blockage or replace burner

 

4.

Improper venting or excessive blockage

4.

Have the vent system inspected, includ-

 

 

 

 

ing the termination cap. Remove any

 

 

 

 

restrictions or obstruction

 

5.

Excessive amounts of embers and pan

5.

Clear excess embers until a minimum

 

 

material

 

gap of 1/2" remains under the grate

For more information, visit www.desatech.com

108796-01D

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Vent Decorative GAS Fireplace For Your SafetyElectronic Ignition Natural GAS What to do if YOU Smell GASSafety Information Table of ContentsUnpacking Introduction Before YOU BeginM36EB,H/VM36EB,H M42EB,H/VM42EB,H Model Product SpecificationsPRE-INSTALLATION Preparation Selecting LocationClearances M36EB,H M42EB,H Mantel Clearances and Wall DetailsVM36EB,H VM42EB,H M36EB,H M42EB,H VM36EB,H VM42EB,HFraming Installing Transition Pipe and Starter CollarTypical B-Vent Configuration Venting InstallationMin Roof Pitch Checking for Proper VentingWall Switch Installation InstallationOptional Remote Control GAS Line HOOK-UPOvertighten Ember and PAN Material PlacementInstalling Logs 1 LOG Placement for M36E/VM36E ModelsInstalling Logs 1A, 1B LOG Placement for M42E/VM42E ModelsInstalling Optional Glass Door Accessory Combustion AIR KIT Model AK4 OptionalAppliance Enclosure Door Opening Vent DamperOperating Fireplace For Your Safety Read Before LightingLighting Instructions To Turn OFF GAS To ApplianceInspecting Burners Cleaning MaintenanceTechnical Service Service HintsWiring Diagram Replacement PartsObserved Problem Possible Cause Remedy TroubleshootingGas leak. See Warning statement at TopVM42EB,H Models Illustrated Parts BreakdownVM36EB/VM42EB Parts ListLogset for M36EB,H and VM36EB,H Models Logs for M36EB,H,M42EB,H, VM36EB,H and VM42EB,H ModelsAccessories Warranty Information

M36E, M42E, VM36E, VM42E, H) AND VM42E(B specifications

Desa M36E, M42E, VM36E, VM42E(H), and VM42E(B) are advanced heating solutions engineered for enhanced performance and versatility in both residential and commercial settings. These models stand out for their efficient heating capabilities and innovative designs, which cater to a variety of heating needs.

The Desa M36E and M42E models offer a robust heating output, making them ideal for larger spaces. The M36E boasts a compact structure that accommodates small to medium areas, while the M42E provides greater output suitable for bigger rooms. Both units are equipped with high-efficiency burners that ensure optimal fuel utilization, leading to significant cost savings over time.

The VM36E and VM42E(H) models take efficiency to the next level. Their advanced combustion technology maximizes heat production while minimizing emissions, aligning with modern environmental standards. The VM36E features a versatile design, allowing it to seamlessly integrate into various décor styles, while providing a steady flow of warm air. Meanwhile, the VM42E(H) is enhanced with a hybrid heating system, enabling users to switch between energy sources, which adds to its adaptability in differing climates or situations.

The VM42E(B) model introduces an innovative breakthrough in heating technology by incorporating smart control features. Users can effortlessly regulate their heating preferences through a smartphone application, allowing for remote management and programming based on individual schedules. This smart technology not only enhances user convenience but also supports energy conservation by promoting efficient usage patterns.

All models come equipped with safety features such as automatic shut-off mechanisms, ensuring peace of mind during operation. The units are designed with durable materials, capable of withstanding prolonged use while maintaining aesthetic appeal.

In summary, Desa's M36E, M42E, VM36E, VM42E(H), and VM42E(B) represent the forefront of modern heating solutions, combining high efficiency, innovative technologies, and user-friendly features. Their diverse applications, coupled with intelligent design, ensure they meet the evolving demands of today's consumers while providing warmth and comfort in any setting.
Top Page Image Contents