Desa SDVBPD Installing DIRECT-VENT Burner System Into Stove Body, Removing Front Surround Panel

Page 7

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Stove Body Assembly (Cont.)

Installing Direct-Vent Burner System Into Stove Body

7

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Continued

12.Check general catch bolt alignment with door claw. Make fi- nal adjustment and door leveling after stove is in normal stand- ing position.

13.Carefully lift stove back up on its four attached legs.

Removing Front Surround Panel

Remove 2 bolts from bottom of stove and set aside. Remove bolt from the top of the stove to remove the front panel assembly (see Figure 13).

Stove

Bolt

Body

 

Front

Assembly

Front

Screws

Screw with

Surround

 

Washer

Plate

 

 

Screw with

 

 

Washer

 

Screen

Screen

 

 

 

 

Front Surround

 

 

Plate and

Front Plate

 

Doors

Amity™ Model

Oxford™ and Victor Hearth™

 

 

Model

Figure 14 - Removing Screen from Front Assembly

INSTALLING DIRECT-VENT BURNER SYSTEM INTO STOVE BODY

1.Carefully lift burner system and place into stove body from the rear of stove.

2.Place the left and right grate tops into the top of stove body. Dis- card center grate top of stove and replace with center grate top provided with burner system.

Figure 13 - Removing Front Assembly (Oxford™ Model Shown)

Removing Screen (Optional)

Amity Models

1.

Lay the front panel assembly face down on a protected sur-

 

face. Remove the two screws that hold the front plate onto the

 

front surround plate (see Figure 14). Save these screws.

2.

Remove the screws and washers that hold the screen onto the

 

front surround plate. Discard these screws, washers, and screen

 

(see Figure 14).

3.

Replace the two screws from step 1 to reassemble the front

Center Top Grate (Included with Burner System)

Left Top

Grate

Right Top Grate

plate and the front surround plate. Set this assembly aside un-

til burner system has been installed, logs have been placed

inside of burner system, and glass door to burner system insert

has been replaced.

Oxford or Victor Hearth Models

1.Lay the front panel assembly face down on a protected sur- face. Remove the screws and washers that hold the screen onto the front surround plate. Discard these screws, washers, and screen (see Figure 14).

2.Set this assembly aside until burner system has been installed, logs have been placed inside of burner system, and glass door to burner system insert has been replaced.

Burner

System

Cast Iron

Stove Body

Figure 15 - Installing Burner System Into Cast Iron Stove Body

For morevisit www..com

112126-01B

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VH series Stove OWNER’S Operation and Installation ManualFor Your Safety For Your Safety What to do if YOU Smell GASSafety Information Table of ContentsWith stove Product IdentificationLocal Codes PRE-INSTALLATION Preparation Product FeaturesGlossary of Terms Cast Iron Stove and DIRECT-VENT Burner System Assembly PRE-INSTALLATION PreparationStove Body Assembly Locating Threaded Holes for Legs and Door Attachment Amity Models Installing DIRECT-VENT Burner System Into Stove BodyRemoving Front Surround Panel Removing Screen OptionalTOP View Installing Optional Blower Accessory Installing the BlowerBlower Wiring Layout Thermostat Blower Shown Installing Rear CoverLocation of Vent Termination General VentingGeneral Venting Installation Precautions Venting InstallationInstallation Planning Installing Vent System in a Chase Installation for Horizontal TerminationVent Opening Requirements Venting with Two 90 Elbows Horizontal Termination ConfigurationsHorizontal Venting Venting with Three 90 ElbowsFlat Ceiling Installation Installation for Vertical TerminationVertical Termination Configurations Cathedral Ceiling InstallationVenting with Two 90 Elbow Venting with Two Elbows Vertical Venting Configuration Using Two 90ElbowsNumber Description High Altitude InstallationParts Lists for Venting Kits and Components Vertical VentingCheck GAS Type Stove and DIRECT-VENT Burner System InstallationInstalling GAS Piping to STOVE/ Burner System Location Installation Items NeededPressure Testing Gas Supply Piping System Connecting STOVE/BURNER System to GAS SupplyChecking GAS Connections Pressure Testing Burner System Gas Connections Installing Optional Wall Mount Switch GWMS2Installing Remote Receiver and 9-volt Alkaline Battery Installing Optional Wall Mounted Thermostat GWMT1REMOVING/REPLACING Glass Door Installing Remote ReceiverInstalling Log No Installing Log No Installing LOGS, Lava Rock and Glowing EmbersTo Turn OFF GAS To Appliance For Your Safety Read Before LightingOperating Stove with Burner System Lighting InstructionsThermostat Series Models Ghrctb and Cghrctb Manual LightingOptional HAND-HELD Remote Operation ON/OFF Series Models Ghrcb and CghrcbOperating Optional GWMT1 Wall Mounted Thermostat Operating Optional Blower AccessoryPilot Assembly Inspecting BurnersLogs Cleaning and MaintenanceGlass Door Pilot and BurnersObserved Problem Possible Cause Remedy TroubleshootingOrifice Above Gas leak. See Warning statementParts Under Warranty SpecificationsWiring Diagram Replacement PartsModels Sdvbnd Sdvbpd Illustrated Parts BreakdownModels SDVBND, Sdvbpd Parts ListVictor Hearth Stove Body Indicates Color Suffix Designation Oxford Amity Stove BodyDescription QTY Indicates Color Suffix DesignationService Hints Technical ServiceAccessories Owners Registration Form For Com 112126-01B Warranty Information
Related manuals
Manual 42 pages 850 b

SDVBPD, SDVBND specifications

Desa SDVBPD and SDVBND are pioneering advancements in the domain of digital communication, designed to optimize services, enhance user engagement, and streamline processes in various sectors, including education, healthcare, and local governance. These systems have emerged as essential tools for efficient information dissemination and resource management.

One of the main features of Desa SDVBPD is its focus on decentralized communication. By utilizing local infrastructure, this system empowers communities to share information effectively and enhance interactions among residents. It enables local authorities to communicate directly with citizens, ensuring that pertinent information reaches the intended audience promptly. This feature is especially vital in emergency situations, where timely updates can significantly impact community safety and preparedness.

Similarly, SDVBND offers a robust platform for managing digital transactions and records. Its integration of blockchain technology ensures that all data processed is secure, immutable, and transparent. This characteristic is particularly beneficial for local government operations, as it minimizes the risk of fraud and enhances accountability in public service delivery. By leveraging this technology, Desa SDVBND can facilitate smooth and fast transactions between citizens and government entities, thereby transforming the way public services are accessed.

Another remarkable aspect of both systems is their accessibility. Designed with user-friendly interfaces, these platforms cater to individuals of varying technological proficiencies. Mobile compatibility allows users to engage with the systems from smartphones and tablets, making it easier to stay informed and involved. Furthermore, the platforms are multilingual, ensuring that communication is inclusive, reaching diverse populations within communities.

Interoperability stands out as a significant characteristic of Desa SDVBPD and SDVBND. Both systems are designed to seamlessly integrate with existing infrastructure and technologies, such as cloud computing and artificial intelligence. This adaptability enhances their functionality, enabling real-time data analysis and improved decision-making.

In conclusion, Desa SDVBPD and SDVBND represent a significant leap forward in community engagement and service delivery. By leveraging decentralized communication, blockchain technology, accessibility, and interoperability, these systems not only improve operational efficiency but also foster a sense of community empowerment. As they continue to evolve, they hold great promise for enabling smarter, more connected communities that can thrive in an increasingly digital world.
Top Page Image Contents