Vermont Casting SR36A, SR42A, SC42A, SC36A manual Chimney Components

SR/SC Series "A" Woodburning Fireplace

Chimney Components

U.S.

Component	Description	Model Number
Round Top Termination	Top used to terminate chimney at roof.	RLTSK8
	(Flashing not included.)
Round Top Termination -	Top used to terminate chimney at chase.	RLTSK8L
Extended	(Flashing not included.)
Flashing	Metal finishing required around Contemporary	8-6-12 with 8" flue:
	Termination to prevent rain leakage.	0-6/12 pitch
		8-12-12 with 8" flue:
		6/12-12/12 pitch
Square Termination	Top housing of simulated brick pattern	S20B (R, T, W)
Housing	available in red, tan or white. Appropriate	Must also include:
	adapter required. Flashing included.	PLTSK8 or SLTSK8
Adapter Kit	Unites Square Termination with chimney	CF8CA
	pipe (required).
Housing Extensions	Extends Square Termination on steep	202036
	pitched roofs.
Square Chase Termination	Housing used to terminate chimney through	CT100
	a chase top. Appropriate adapter required.
	(Flashing not included.)
Adapter Kit	Unites Square Chase Termination with chimney	CTSK
	pipe (required).
Chase Top Housing	Low profile pyramid-style chimney cap used to	PLTSK8
	terminate chimney through a chase. Includes
	adapter. (Flashing not included.)
Chase Top Housing	Square chimney cap used to terminate chimney	SLTSK8
	through a chase. Terra Cotta Masonry. Includes
	adapter. (Flashing not included.)
SK8 Chimney Sections	Pipe used to build 8" (SK8) flue systems.	SK81 (1' Long)
		SK818 (1¹⁄₂' Long)
		SK83 (3' Long)
		SK84 (4' Long)
SK8 Chimney Elbows	Elbow used to create an offset in an 8"	SK830-2
	chimney system. Only 30˚ elbows available.
	Packaged 2 per carton (offset and return).
Firestop	Required at each floor level of chimney	SKFS2A —
	installation. (Plus attic on multi-story installation.)	(8" straight flue)
		SKFS6A —
		(8" 30˚ inclined flue)
Chimney Support	Used to support chimney for each of: 30' vertical	SKCS8
	height and 6' of angled chimney run.

7412948 21