To Turn Off Gas To Heater

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

Lighting And Operating Instructions

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING:If you do not follow these instructions exactly, a fire or explosion

may result causing property damage, personal injury or loss of life.

A.This heater has a pilot which must be lit manu- ally. When lighting the pilot follow these instruc- tions exactly.

B.BEFORE LIGHTING smell all around the heater area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any fireplace

•Do not touch any electric switch

•Do not use any phone in your building

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Applying force or any attempted repair may result in a fire or explosion.

D.Do not use this fireplace if any part has been under water. Immediately call a qualified service techni- cian to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Lighting Instructions

1.STOP! Read the safety information above.

2.Turn off all electrical power to the fireplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to “OFF” position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn

clockwise to "OFF".

				PILOT	OFF
				PILOT	PILOT
		1			PILOT
t		1	F
t
o				ON	ON
P
F			F
l
i		2
O		2	O
F
5		3		FFO
5	4	3
	4
Euro SIT			SIT NOVA		Honeywell

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you do not smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal section).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depress- ing the piezo spark ignitor until a flame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

3/8" - 1/2"

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If after several tries, the pilot will not stay lit, turn the gas control knob to " " and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to “ON” position.

13.For RN/RP appliances turn the On/Off switch to “ON” position or set thermostat to desired setting.

14.Turn on all electrical power to the fireplace.

1.	Turn the On/Off switch to "OFF" position or set	3.	Open control access panel.
	the thermostat to lowest setting.	4.	Push in gas control knob slightly and turn
2.	Turn off all electric power to the fireplace if		clockwise	to "OFF". Do not force.
	service is to be performed.	5.	Close control access panel.

10000801

RHEDV25, RHEDV42, RHEDV32 specifications

Vermont Casting has long been revered in the fireplace and stove industry for its commitment to quality and craftsmanship. Among its range of high-performance products, the RHEDV32, RHEDV25, and RHEDV42 stand out as versatile, efficient, and stylish heating solutions. These models are ideal for homeowners looking to enhance their living spaces while enjoying the warmth and comfort only a wood-burning stove can provide.

The RHEDV series features a sleek design that showcases Vermont Casting's aesthetic commitment to both form and function. Each model in the series offers a variety of sizes and styles, allowing homeowners to choose the perfect fit for their space. With a wide viewing window, these stoves provide a beautiful glimpse of the flickering flames, creating an inviting ambiance in any room.

A key feature of the RHEDV series is its efficient energy use. Each model is designed with advanced combustion technology that maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also ensures that the stoves meet stringent EPA regulations. The clean-burning technology utilized in the RHEDV32, RHEDV25, and RHEDV42 means that users can enjoy the warmth of wood without the worry of excessive smoke or harmful pollutants.

Furthermore, these models impress with their impressive heating capacity. The RHEDV32 can efficiently heat spaces up to 1,800 square feet, while the RHEDV25 and RHEDV42 cater to slightly smaller and larger areas respectively. This adaptability makes them suitable for various settings, from cozy cabins to larger family homes.

The construction of the RHEDV series reflects Vermont Casting's dedication to durability. Made from high-quality cast iron, these stoves are built to last. The material not only provides excellent heat retention but also adds to the overall aesthetic appeal. Additionally, the stoves come equipped with an air wash system that helps keep the glass clean, ensuring unobstructed views of the fire.

Ease of use is another hallmark of the RHEDV series. Each model features a straightforward operating system, allowing users to easily control the airflow and heat output. This responsiveness ensures efficient burning and optimal warmth throughout the home.

In conclusion, Vermont Casting's RHEDV32, RHEDV25, and RHEDV42 models exemplify the perfect blend of efficiency, style, and ease of use. With their advanced combustion technologies, impressive heating capacities, and durable construction, they are an excellent choice for anyone looking to improve their home heating experience while adding a touch of elegance to their décor.