Troubleshooting the Gas Control System

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

Eurosit 630 Gas Valve

NOTE: Before troubleshooting the gas control system, be sure external gas shut off is in the "On" position.

WARNING: Before doing any gas control service work, remove glass front.

Symptom	Possible Causes	Corrective Action
1. Spark ignitor will not light	A. Defective or misaligned	Using a match, light pilot. If pilot lights, turn off pilot and
	electrode at pilot.	push the red button again. If pilot will not light - check
		gap at electrode and pilot-should be 1/8" to have a
		strong spark.
	B. Defective ignitor (Push Button)	Push Piezo Ignitor Button. Check for spark at electrode
		and pilot. If no spark to pilot, and electrode wire is
		properly connected, replace ignitor.
2. Pilot will not stay lit after	A. Defective pilot generator	Check pilot flame. Must impinge on thermocouple.
carefully following lighting	thermocouple.	Clean and or adjust pilot for maximum flame impinge-
ment instructions.		on thermocouple.
	B. Defective automatic valve	Turn valve knob to "Pilot". Maintain flow to pilot;
	operator.	millivolt meter should read greater than 10 mV. If the
		reading is okay and the pilot does not stay on, replace
		the gas valve. Note: An interrupter block (not supplied)
		must be used to conduct this test.
3. Pilot burning, no gas to	A. Sensing bulb not in proper	Make sure sensing bulb is located in bracket on the
burner, Valve knob "ON".	location.	lower right hand side of unit.
	B. Temperature sensing bulb	Carefully examine sensing bulb and capillery tube for
	damaged or tubing to bulb	damage. If tubing is kinked, replace gas valve.
	kinked
4. Frequent pilot outage	A. Pilot flame may be too low	Clean and/or adjust pilot flame for maximum flame
problem.	or blowing (high) causing the	impingement on thermocouple.
		pilot safety to drop out.
	B. Possible leak in liner or seals.	Check the venting for leaks or blockage.

10000801

RHEDV25, RHEDV42, RHEDV32 specifications

Vermont Casting has long been revered in the fireplace and stove industry for its commitment to quality and craftsmanship. Among its range of high-performance products, the RHEDV32, RHEDV25, and RHEDV42 stand out as versatile, efficient, and stylish heating solutions. These models are ideal for homeowners looking to enhance their living spaces while enjoying the warmth and comfort only a wood-burning stove can provide.

The RHEDV series features a sleek design that showcases Vermont Casting's aesthetic commitment to both form and function. Each model in the series offers a variety of sizes and styles, allowing homeowners to choose the perfect fit for their space. With a wide viewing window, these stoves provide a beautiful glimpse of the flickering flames, creating an inviting ambiance in any room.

A key feature of the RHEDV series is its efficient energy use. Each model is designed with advanced combustion technology that maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also ensures that the stoves meet stringent EPA regulations. The clean-burning technology utilized in the RHEDV32, RHEDV25, and RHEDV42 means that users can enjoy the warmth of wood without the worry of excessive smoke or harmful pollutants.

Furthermore, these models impress with their impressive heating capacity. The RHEDV32 can efficiently heat spaces up to 1,800 square feet, while the RHEDV25 and RHEDV42 cater to slightly smaller and larger areas respectively. This adaptability makes them suitable for various settings, from cozy cabins to larger family homes.

The construction of the RHEDV series reflects Vermont Casting's dedication to durability. Made from high-quality cast iron, these stoves are built to last. The material not only provides excellent heat retention but also adds to the overall aesthetic appeal. Additionally, the stoves come equipped with an air wash system that helps keep the glass clean, ensuring unobstructed views of the fire.

Ease of use is another hallmark of the RHEDV series. Each model features a straightforward operating system, allowing users to easily control the airflow and heat output. This responsiveness ensures efficient burning and optimal warmth throughout the home.

In conclusion, Vermont Casting's RHEDV32, RHEDV25, and RHEDV42 models exemplify the perfect blend of efficiency, style, and ease of use. With their advanced combustion technologies, impressive heating capacities, and durable construction, they are an excellent choice for anyone looking to improve their home heating experience while adding a touch of elegance to their décor.