A4 Riser Kits, Trim Options for RHEDV32

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

A4 Riser Kits

For use with RHEDV25 (Refer to Page 34, Figure 55)

1.Install the unit according to Homeowner’s Manual.

2.Install the trim according to Installation Instructions.

3.Remove the two (2) screws at the bottom of the trim.

4.Install the riser at the bottom of the trim. (Fig. 55)

5.Fasten the trim with the same two (2) screws removed on step 3.

Riser Trim Dimensions

	Length - A	Height - B	Depth - C
RHE25R1-Riser 1"	38.3" (973mm)	1" (25.6mm)	2.86" (72.8mm)
RHE25R-2Riser 2"	38.3" (973mm)	2" (50.9mm)	2.89" (73.6mm)
RHE25R5-Riser 5"	38.3" (973mm)	5" (127.9mm)	2.86" (72.8mm)

3.Install the trim top deflector and use two screws to fasten it. (Fig. 39 & 40)

4.Remove ALL plastic protective covering from brass trim.

	Trim Top
	Channel
Trim
Side		Trim
Channel		Side
	Deflector	Channel
Screw	Trim Top
Screw
		FP1260
Fig. 39	Install trim channels and trim top deflector.

B Trim Options for RHEDV32

B1 RHESS, RHESL, RHESSD, RHESLD, &

RHESXL Trims

For use with RHEDV32

Frame Assembly

RHESS, RHESL, RHESSD, RHESLD and RHESXL

1.Lay Trim Top Facing and Trim Side Facings, face down on to an even surface such as a table or floor. Be sure not to scratch the painted surfaces.

2.Install the nuts and bolts. (Fig. 38)

Rear View	10/24 Screws
	Frame Top

10/24

Nuts

Left

Frame

Right Frame

FP1259

Fig. 38 Attach left and right frame to frame top.

Trim Assembly

RHESS, RHESL and RHESXL (Fig. 39)

1.Install trim channels (left and right sides). Use two screws to assemble each piece.

2.Slide on the trim top channel and fasten it from the back side.

Side View

Trim Top Deflector

Trim Frame Top

Section

FP1261a

Fig. 40 Trim top deflector.

RHESSD and RHESLD (Fig. 41)

1.Install trim channels (left and right sides). Use two screws to assemble each piece.

2.Peel off plastic protective covering from top edges of the inner sides where they will be covered by the inner top trim facing.

3.Place the trim facing inner top in place (do not fasten it yet). Peel off the plastic protective covering from the bottom edge.

4.Install the trim top deflector and fasten it (will hold the inner top piece). Use two screws to assemble them.

5.Install trim channels (left and right sides). Use two screws to assemble each piece.

6.Slide on the trim top channel and fasten it from the back side.

7.Remove ALL plastic protective covering from brass trim.

10000801

RHEDV25, RHEDV42, RHEDV32 specifications

Vermont Casting has long been revered in the fireplace and stove industry for its commitment to quality and craftsmanship. Among its range of high-performance products, the RHEDV32, RHEDV25, and RHEDV42 stand out as versatile, efficient, and stylish heating solutions. These models are ideal for homeowners looking to enhance their living spaces while enjoying the warmth and comfort only a wood-burning stove can provide.

The RHEDV series features a sleek design that showcases Vermont Casting's aesthetic commitment to both form and function. Each model in the series offers a variety of sizes and styles, allowing homeowners to choose the perfect fit for their space. With a wide viewing window, these stoves provide a beautiful glimpse of the flickering flames, creating an inviting ambiance in any room.

A key feature of the RHEDV series is its efficient energy use. Each model is designed with advanced combustion technology that maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also ensures that the stoves meet stringent EPA regulations. The clean-burning technology utilized in the RHEDV32, RHEDV25, and RHEDV42 means that users can enjoy the warmth of wood without the worry of excessive smoke or harmful pollutants.

Furthermore, these models impress with their impressive heating capacity. The RHEDV32 can efficiently heat spaces up to 1,800 square feet, while the RHEDV25 and RHEDV42 cater to slightly smaller and larger areas respectively. This adaptability makes them suitable for various settings, from cozy cabins to larger family homes.

The construction of the RHEDV series reflects Vermont Casting's dedication to durability. Made from high-quality cast iron, these stoves are built to last. The material not only provides excellent heat retention but also adds to the overall aesthetic appeal. Additionally, the stoves come equipped with an air wash system that helps keep the glass clean, ensuring unobstructed views of the fire.

Ease of use is another hallmark of the RHEDV series. Each model features a straightforward operating system, allowing users to easily control the airflow and heat output. This responsiveness ensures efficient burning and optimal warmth throughout the home.

In conclusion, Vermont Casting's RHEDV32, RHEDV25, and RHEDV42 models exemplify the perfect blend of efficiency, style, and ease of use. With their advanced combustion technologies, impressive heating capacities, and durable construction, they are an excellent choice for anyone looking to improve their home heating experience while adding a touch of elegance to their décor.