OWNER’S MANUAL

PRE-INSTALLATION PREPARATION

Continued

4"4"

Figure 4 - Clearance for Corner Installation

26"

Front

25"

Figure 5 - Freestanding Fireplace Bottom Dimensions

FREESTANDING FIREPLACE ASSEMBLY

STOVE BODY ASSEMBLY

1.Lift off corrugated box enclosing stove body crating.

2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove body. The bottom pieces of pallet wood will remain bolted to the stove body.

3.Remove plastic bag from stove body.

4.Remove back panel from stove (see Figure 6). Use an adjustable wrench or a 10 mm socket. Remove six (6) bolts and washers. Keep bolts and washers to reattach back panel later.

5.Remove all contents from inside stove cavity. Contents include:

(1) - Stove bottom

(4)- Legs with leg leveler bolts

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

6.Carefully lay stove body on back to at- tach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.

Bolt

Product

 

Back

Identification

Label

Stove

 

Panel

 

7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.

8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 9 and 10, page

6). Use an adjustable wrench or a 12mm socket.

9.Fasten stove bottom to stove with four

(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figure 9 and 11, page

6). Use an adjustable wrench or a 10mm socket.

Pallet

BoltFront Wood

Pallet Wood

Bottom Of

 

Stove Unit

Figure 8 - Removing Pallet Wood From The Bottom of The Stove

Figure 6 - Removing Back Panel

 

 

Top of Stove Unit

 

Front of

 

Front of

 

Stove Unit

Stove

 

Top of

 

Stove

Unit

 

Pallet

Unit

 

Drop

 

Wood

 

Cloth/

Bolted to

 

Blanket

Bottom of

 

 

Stove

 

 

Body

 

Figure 7 - Laying Down Stove On Side

Continued

105500

5

Page 5
Image 5
Desa SBVBN(A) Freestanding Fireplace Assembly, Stove Body Assembly, Lift off corrugated box enclosing stove body crating

SBVBN(A), SBVBP(A) specifications

Desa SBVBN(A) and SBVBP(A) are innovative solutions in the realm of wireless communication, designed to enhance connectivity and network efficiency. Each model is tailored for specific applications, making them essential tools in modern telecommunications.

One of the primary features of both the SBVBN(A) and SBVBP(A) models is their support for advanced modulation techniques. These modulations allow for higher data rates and improved spectral efficiency, which are critical for congested environments. By employing technologies such as Orthogonal Frequency-Division Multiplexing (OFDM), these systems can deliver superior performance even in challenging conditions.

In terms of connectivity, SBVBN(A) focuses on boosting signal strength over long distances. This is especially vital in rural areas where traditional infrastructure may be lacking. The system can cover expansive regions with minimal signal degradation, ensuring reliable communication. Meanwhile, SBVBP(A) is optimized for high-density urban settings, capable of handling a large number of simultaneous connections without compromising speed or quality.

The integration of artificial intelligence and machine learning technologies is another standout feature. Both models utilize smart algorithms to analyze network traffic in real-time, enabling dynamic adjustments to optimize performance. This capability is crucial in environments where user demand can fluctuate drastically, allowing for adaptive resource allocation and enhanced user experience.

Power efficiency is also a significant characteristic of Desa SBVBN(A) and SBVBP(A). Equipped with energy-saving technologies, these systems minimize power consumption while maximizing output. This not only reduces operational costs but also aligns with global sustainability goals.

Moreover, the systems are designed with scalability in mind. They can be easily integrated into existing infrastructures, providing a seamless upgrade path for telecommunication providers looking to enhance their services without major overhauls.

Security is a top priority for both products. They incorporate advanced encryption protocols and access controls, ensuring that data transmission remains secure and protecting against potential threats.

In summary, Desa SBVBN(A) and SBVBP(A) represent the future of wireless communication, with their focus on advanced modulation, AI integration, energy efficiency, scalability, and security. These features make them ideal solutions for a variety of applications, ranging from rural connectivity to urban high-density environments, thus playing a significant role in bridging the digital divide and fostering enhanced communication worldwide.