OWNER’S MANUAL

OPERATING

FIREPLACE

Continued

OPTIONAL REMOTE

OPERATION

Note: All remote control accessories must be purchased separately (See Accessories on page 27). Follow instructions included with the remote control.

Thermostat Control Operation

Selector Switch in Remote

Position (GHRC Optional

Remote Control)Control Knob in

On Position

 

LO H

 

ON

 

I

 

 

REMOTE OFF ON

 

T

 

 

L

 

 

 

O

OFF

 

 

I

 

 

P

 

Flame Adjustment Knob

Figure 46 - Setting the (GHRC) Remote Control Selector Switch, Valve Control Knob, and Flame Adjustment Knob for Remote Operation

In auto mode, the room tempera- ture is controlled by the thermo- stat in the hand-held remote con- trol unit. To increase the room tem- perature, press the top arrow of the TEMP button. To lower the room temperature, press the bottom ar- row of the TEMP button. At higher settings the heater will run more.

IMPORTANT: This remote control has been specially engineered to take an air temperature sample every 5.5 minutes in auto mode. It will not re- spond immediately to the tempera-

(Optional GHRCT Only) The thermostat control setting on the remote control unit can be set to any comfort level between HI and LO. The burners will turn on and off automatically to maintain the comfort level you select. The ideal comfort setting will vary by household depending upon the amount of space to be heated, the output of

Selector Switch in

Remote Position

(GHRCT Optional

Remote Control)

ON

OFF

REMOTE

Control Knob in On Position

O

H

 

 

L

 

ON

 

I

 

 

 

 

T

 

 

 

O

OFF

 

 

L

 

 

 

I

 

 

 

P

 

ture setting being turned up or down.

IMPORTANT: The hand-held remote control unit must be near the heater but not extremely close to it. The thermostat on the hand-held remote control unit will heat up too quickly and turn the heater off.

the central heating system, etc.

NOTICE: You must light the pilot before using the hand-held re- mote control unit. See Lighting Instructions, page 18 .

1. After lighting, let pilot flame burn for

about one minute. Turn control knob

on the control valve to ON position.

Turn flame adjustment knob any-

where between HI and LO. Slide the

selector switch to the REMOTE posi-

tion. Note: The burners may light if

hand-held remote ON button was on

when selector switch was last turned

off. You can now turn the burners on

and off with either optional hand-held

remote control unit.

Flame Adjustment Knob

Figure 47 - Setting the (GHRCT) Selector Switch, control Knob, and Flame Adjustment Knob for Remote Operation

GHRC Series Operation:

2a. Press the ON/OFF button to turn the burners on and off. When turning burners off, the pilot will remain lit.

GHRCT Series Operation:

2b. Select the MAN (manual) or AUTO button on the hand-held remote con- trol unit (see Figure 48).

In manual mode, turn burners on or off by pressing the ON or OFF buttons on the hand-held remote control unit.

3.Use the STATUS button on the hand- held remote control unit to see the operation mode being used and the temperature setting selected. A red light will come on beside the opera- tion mode being used.

4.To turn the burners off when operat- ing in the manual mode, press the OFF button. If operating in the auto mode, press the MAN button, then press the OFF button. The pilot will remain lit. IMPORTANT: To turn the pilot off, manually turn the control knob on the heater to the OFF position.

IMPORTANT: Do not leave the se-

lector switch in the REMOTE posi-

tion when the pilot is not lit. This will

drain the battery.

IMPORTANT: Be sure to press the

ON/OFF buttons on the hand-held

remote control unit for up to 3 sec-

onds to assure proper operation.

Shows Temperature Setting

Allows Burners to be Turned On and Off with the Hand-Held Remote Unit

The Heater will Automatically Cycle Between Pilot and the Heat Setting that has been Selected

HI

TEMP

MAN LO ON

AUTO OFF

STATUS

Increases Room Temperature

Decreases Room Temperature

Turns Burners On and Off

Shows Current Operation Mode

Figure 48 - Hand-Held Thermostat Remote Control Unit Selections

 

(GHRCT Only)

Continued

105500

19

Page 19
Image 19
Desa SBVBN(A) Optional Remote Operation, Thermostat Control Operation, Ghrc Series Operation, Ghrct Series Operation

SBVBN(A), SBVBP(A) specifications

Desa SBVBN(A) and SBVBP(A) are innovative solutions in the realm of wireless communication, designed to enhance connectivity and network efficiency. Each model is tailored for specific applications, making them essential tools in modern telecommunications.

One of the primary features of both the SBVBN(A) and SBVBP(A) models is their support for advanced modulation techniques. These modulations allow for higher data rates and improved spectral efficiency, which are critical for congested environments. By employing technologies such as Orthogonal Frequency-Division Multiplexing (OFDM), these systems can deliver superior performance even in challenging conditions.

In terms of connectivity, SBVBN(A) focuses on boosting signal strength over long distances. This is especially vital in rural areas where traditional infrastructure may be lacking. The system can cover expansive regions with minimal signal degradation, ensuring reliable communication. Meanwhile, SBVBP(A) is optimized for high-density urban settings, capable of handling a large number of simultaneous connections without compromising speed or quality.

The integration of artificial intelligence and machine learning technologies is another standout feature. Both models utilize smart algorithms to analyze network traffic in real-time, enabling dynamic adjustments to optimize performance. This capability is crucial in environments where user demand can fluctuate drastically, allowing for adaptive resource allocation and enhanced user experience.

Power efficiency is also a significant characteristic of Desa SBVBN(A) and SBVBP(A). Equipped with energy-saving technologies, these systems minimize power consumption while maximizing output. This not only reduces operational costs but also aligns with global sustainability goals.

Moreover, the systems are designed with scalability in mind. They can be easily integrated into existing infrastructures, providing a seamless upgrade path for telecommunication providers looking to enhance their services without major overhauls.

Security is a top priority for both products. They incorporate advanced encryption protocols and access controls, ensuring that data transmission remains secure and protecting against potential threats.

In summary, Desa SBVBN(A) and SBVBP(A) represent the future of wireless communication, with their focus on advanced modulation, AI integration, energy efficiency, scalability, and security. These features make them ideal solutions for a variety of applications, ranging from rural connectivity to urban high-density environments, thus playing a significant role in bridging the digital divide and fostering enhanced communication worldwide.