ASSEMBLY
ASSEMBLY
REAR MOWER ATTACHMENT
Install the Rear Lift Arm (1) on the Main Frame with a Frame Pin (2) and secure Pin with Bolt (3).
ATTENTION: Do not drive pin in with hammer, this will damage the Pivot Tube. Pin should slide in with very lit- tle resistance. Attach the Rear Cylinder (4) to Rear Lift Arm (1) with Pin (2) and secure with Bolt (3).
Attach Rear Lift Arm (1) to Lower Hitch (5) and secure with Pin (6), lock Pin with a Cllip Pin. Install Bushing in
TX235 02/07 | Assembly Section |
© 2007 Alamo Group Inc.