Alamo TX235 manual Operation

OPERATION

OPERATION

•Inspect oil level in all gearboxes and replenish if needed. A low oil level is a warning sign that the gearbox may be cracked or its seal damaged and needs to be replaced.

•Perform scheduled lubrication as specified in the maintenance section. OPS-R-0076_B

•Inspect cutter knives and knife pins for looseness and excessive wear. Make sure the mower is securely blocked up before crawling beneath. Replace damaged, worn, and missing knives as complete sets to maintain cuttershaft balance.

•Remove any grass or other debris which may be wrapped around the cuttershafts.

•Inspect the condition of deck skid shoes and hardware. OPS-R-0050

•Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured with pins.

•Check for hydraulic oil leaks on the cylinders, along the hydraulic lines, and at tractor hydraulic ports. IMPORTANT: DO NOT use your hands to check for oil leaks. Use a piece of heavy paper or cardboard to check for hydraulic oil leaks. OPS-R-0013_D

TX235 02/07 Operation Section 4-18

© 2007 Alamo Group Inc.