Alamo TX235 manual Hydraulic Hose Attachment, Spool Valve, Lock-Up Arms Attachment, Smv Attachment

ASSEMBLY

ASSEMBLY

HYDRAULIC HOSE ATTACHMENT

Remove the caps from Hydraulic Manifold (6) on the Main Frame, Asm-R-0330.Hydraulic Hose P/N 001849 is used (Right Side) for the Wing Cylinder, Hose P/N 03200806 is used for Left Side Cylinder and Hose P/N 02964451 is used for the Rear Cylinder. Hose P/N 02905100 attaches to the remote on the Tractor Hydraulics. On the Hose P/N 02905100 at the Tractor disconnect install Fitting P/N 02957691.

3-SPOOL VALVE

Cap the two side ports of the Manifold and connect the wing hoses to Hoses P/N 02905100 with the 1/4” male JIC x 1/4” NPT pipe fittings.

LOCK-UP ARMS ATTACHMENT

Install the Wing Lock-up Arms on the Left Wing Lift Arm with 3/16” x 2” Cotter Pin at the lower Pin and Clip Pin at the top Pin.

SMV ATTACHMENT

Remove top Bolt from the Divider Gearbox Cover and attach Mounting Bracket. Bolt SMV to Bracket.

ROPE ROUTING

Attach rope ends to latch at location shown in Asm-R-0331.

TX235 02/07 Assembly Section 3-8

© 2007 Alamo Group Inc.