To Turn Off Gas To Heater

Vermont Castings, Majestic Products RHE Natural Vent Insert

Lighting And Operating Instructions

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING:If you do not follow these instructions exactly, a fire or explosion

may result causing property damage, personal injury or loss of life.

A.This heater has a pilot which must be lit manu- ally. When lighting the pilot follow these instruc- tions exactly.

B.BEFORE LIGHTING smell all around the heater area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any fireplace

•Do not touch any electric switch

•Do not use any phone in your building

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Applying force or any attempted repair may result in a fire or explosion.

D.Do not use this fireplace if any part has been under water. Immediately call a qualified service techni- cian to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Lighting Instructions

1.STOP! Read the safety information above.

2.Turn off all electrical power to the fireplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to “OFF” position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn

clockwise to "OFF".

				PILOT	OFF
				PILOT	PILOT
		1			PILOT
t		1	F
t
o				ON	ON
P
F			F
l
i		2
O		2	O
F
5		3		FFO
5	4	3
	4
Euro SIT			SIT NOVA		Honeywell

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you do not smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal section).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depress- ing the piezo spark ignitor until a flame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

3/8" - 1/2"

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If after several tries, the pilot will not stay lit, turn the gas control knob to "OFF" and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to “ON” position.

13.For RN/RP appliances turn the On/Off switch to “ON” position or set thermostat to desired setting.

14.Turn on all electrical power to the fireplace.

1.	Turn the On/Off switch to Off position or set the	3.	Open control access panel.
	thermostat to lowest setting.	4.	Push in gas control knob slightly and turn
2.	Turn off all electric power to the fireplace if		clockwise	to "OFF". Do not force.
	service is to be performed.	5.	Close control access panel.

10000836

RHE25, RHE32, RHE42 specifications

Vermont Castings has long been a trusted name in the world of cast iron stoves and fireplaces, known for their timeless design and superior craftsmanship. Among their impressive lineup are the RHE42, RHE32, and RHE25 gas fireplaces, each tailored to meet varying needs while elevating the ambiance of any space.

The RHE42 is a standout appliance, boasting a generous heating capacity suitable for larger areas. Its expansive viewing area allows for an impressive flame display, creating a captivating centerpiece for any room. One of the key features of the RHE42 is its advanced burner system, which delivers an even heat distribution and optimal efficiency. Homeowners will appreciate the programmable remote control, providing effortless adjustments to temperature and flame height, enhancing the overall user experience.

Moving to the RHE32, this model strikes an ideal balance between compact size and robust heating performance. Designed for medium-sized rooms, the RHE32 maximizes efficiency without compromising style. With a variety of customizable front finishes and decorative options, this fireplace can seamlessly fit into any decor. The optional blowers enhance heat circulation, ensuring that warmth reaches every corner of the room. The RHE32 is also equipped with a user-friendly electronic ignition system, enabling quick and reliable startup.

The RHE25 is Vermont Castings' smaller yet equally impressive offering. This model caters to those needing a fireplace with a space-saving design while still delivering ample warmth. Ideal for smaller living areas or even as an efficient supplemental heat source, the RHE25 emphasizes environmentally friendly heating with its low emissions and high efficiency. The beautiful cast iron construction not only adds to its aesthetic appeal but also ensures longevity and durability. The easy-to-use controls, alongside the compact design, make it perfect for any homeowner looking for convenience without sacrificing quality.

All three models feature Vermont Castings' signature cast iron construction, ensuring not only durability but also superior heat retention. With an eye on energy efficiency, these fireplaces are designed to meet high efficiency ratings, contributing to reduced heating costs and lower environmental impact. The combination of striking aesthetics, state-of-the-art technology, and superior performance makes the RHE42, RHE32, and RHE25 exceptional choices for anyone looking to enhance their home heating experience. Whether you desire a grand centerpiece or a compact heating solution, Vermont Castings delivers options that cater to every taste and need.