Vermont Casting RHE32, RHE42, RHE25 installation instructions KT209a

Vermont Castings, Majestic Products RHE Natural Vent Insert

On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Figure 51. The Honeywell extension pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Figure 51.

2.Install the hanging brackets. (Fig. 52)

3.Install bracket on each side of the cabinet. (Fig. 56)

4.Install the two ceramic pieces inside the bay win- dow. (Fig. 48)

5.Install the bay window by hanging it onto the lower tabs of the hanging brackets. (Fig. 51)

6.Install top louvre by engaging the oblong holes with the upper tabs of the hanging brackets. (Fig. 54)

7.Install brass trim to the steel frame. (Fig. 55)

Fan Control Box

	KT205
Fig. 49	Remove fan control box.
	Fan Control
	Box
Extension
Bracket
	KT207

Fig. 50 Attach the control box to the bracket and install bracket into the cabinet.

Extension

Knobs

KT204a

Fig. 51 Install the knob extensions. (RN/RP models Only)

Hanging Bracket

	KT209a
Fig. 52	Hanging bracket alignment.
	KT210

Fig. 53 Hang the window grille or the steel frame onto the lower tabs of the hanging brackets.

KT211

Fig. 54 Engage the slots in the upper grille top louvre with the upper tabs of the hanging bracket.

	KT212a
Fig. 55	Attach magnets and brass trim to the steel frame.

FP1270

Fig. 56 Bracket for HEBTKP.

32 10000836