Operating Instructions

Vermont Castings, Majestic Products RHE Natural Vent Insert

General Glass Information

Only ceramic glass approved for use in Majestic fireplaces may be used for replacement on this fireplace.

1.The use of substitute glass will void all product warranties.

2.Care must be taken to avoid breakage of the glass.

3.Under no circumstances should this fireplace be operated without front glass properly installed, or with any cracked or broken glass. Replacement of any glass assembly as supplied by the manufacturer should be done by a licensed qualified service person.

Louvre Removal

Before remounting glass frame, brass trim must be installed. Refer to instruc- tions in "Frame Mounting" section.

Glass Frame
Screws
Machine Screws
Open Access Door	FP1373
	FP1373

Fig. 16 Remove glass frame.

To remove top flat louvre pull louvre up and then lift out.

FP444

Louvre

Glass

Panel

Installation of Logs

1 . Remove front glass. (Refer to "Glass Removal" section)

2.	Remove logs from packaging.
3.	Place rear log (JR4/KR4 or SR4) on rear bracket
	(ensure log is seated properly, leveled and
	centered to the unit), so it will not move from side to
	side and is firmly positioned on the bracket.
4.	Slip front ember log (KR1or SR1) down in the front

Fig. 15 Louvre removal.

Glass Cleaning

It will be necessary to clean the glass periodically. During start-up, condensation, which is normal, forms on the inside of the glass and causes lint, dust and other airborne particles to cling to the glass surface. Also initial paint curing may deposit a slight film on the glass. It is therefore recommended the glass be cleaned two or three times with a non-ammonia household cleaner and warm water (we recommend gas fireplace glass cleaner). After that the glass should be cleaned two or three times during each heating season depending on the circumstances present.

Clean glass after first two weeks of operation.

Glass Frame Removal

1.Remove the top louvre. (Refer to "Louvre Removal" section)

2.Open the access door.

3.Remove two (2) machine screws from the bottom of glass frame. (Fig. 16)

4.Lift up and unhook glass frame at the top.

	deflector.
5.	Place front left log (JR2/KR2 or SR2) on top
	burner, left side. Use log's bottom holes to locate it
	into the left bracket log locator studs.
6.	Place front right log (JR3/KR3 or SR3) on top of
	burner, right side. Use log's bottom holes to locate
	it into the right bracket log locator studs.
7.	Place burner lava rock material on top of burner.
	(Refer to Figs. 17, 18 & 19 for proper location).
8.	Place top left log (JR5/KR5 or SR5) onto locator
	notches. Ensure log is secure.
9.	Place top right log (JR6/KR6 or SR6) onto locator
	notches. Ensure log is secure.

Top logs must be placed properly into notches.

10000836

RHE25, RHE32, RHE42 specifications

Vermont Castings has long been a trusted name in the world of cast iron stoves and fireplaces, known for their timeless design and superior craftsmanship. Among their impressive lineup are the RHE42, RHE32, and RHE25 gas fireplaces, each tailored to meet varying needs while elevating the ambiance of any space.

The RHE42 is a standout appliance, boasting a generous heating capacity suitable for larger areas. Its expansive viewing area allows for an impressive flame display, creating a captivating centerpiece for any room. One of the key features of the RHE42 is its advanced burner system, which delivers an even heat distribution and optimal efficiency. Homeowners will appreciate the programmable remote control, providing effortless adjustments to temperature and flame height, enhancing the overall user experience.

Moving to the RHE32, this model strikes an ideal balance between compact size and robust heating performance. Designed for medium-sized rooms, the RHE32 maximizes efficiency without compromising style. With a variety of customizable front finishes and decorative options, this fireplace can seamlessly fit into any decor. The optional blowers enhance heat circulation, ensuring that warmth reaches every corner of the room. The RHE32 is also equipped with a user-friendly electronic ignition system, enabling quick and reliable startup.

The RHE25 is Vermont Castings' smaller yet equally impressive offering. This model caters to those needing a fireplace with a space-saving design while still delivering ample warmth. Ideal for smaller living areas or even as an efficient supplemental heat source, the RHE25 emphasizes environmentally friendly heating with its low emissions and high efficiency. The beautiful cast iron construction not only adds to its aesthetic appeal but also ensures longevity and durability. The easy-to-use controls, alongside the compact design, make it perfect for any homeowner looking for convenience without sacrificing quality.

All three models feature Vermont Castings' signature cast iron construction, ensuring not only durability but also superior heat retention. With an eye on energy efficiency, these fireplaces are designed to meet high efficiency ratings, contributing to reduced heating costs and lower environmental impact. The combination of striking aesthetics, state-of-the-art technology, and superior performance makes the RHE42, RHE32, and RHE25 exceptional choices for anyone looking to enhance their home heating experience. Whether you desire a grand centerpiece or a compact heating solution, Vermont Castings delivers options that cater to every taste and need.