Security System Operation (cont'd)
How to Disarm the System
IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return after an alarm has occurred and the main sounder has shut itself off, the TouchCenter will beep rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.
The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is when you have been in the premises with the system armed (i.e., Stay and Night arming modes).
To disarm the system when entering the premises:
The TouchCenter will automatically display the Entry Delay Active screen when you enter the premises:
Enter your Code. The partition will be disarmed and the "Arming" screen is displayed showing the system as Ready to Arm.
Note: If you have a commercial system and a time window has been defined for when you may disarm the system, the system will not disarm if you are outside that time window.
To disarm the system when already in the premises:
SCREEN | ACTION |
1.Press the DISARM button on the "Armed" screen. The "User Authorization" screen is displayed with the instructions “To Disarm, Enter Code”.
24
