Honeywell 6271 User Code Setup Contd, Screen, Action, selected, the Allow Arm/Disarm from, Digits

	User Code Setup (Cont'd)
SCREEN	ACTION
	7. Select the partitions and access level
	for this user. After the access level is
	selected, the Allow Arm/Disarm from
	other partitions box becomes available
	when interfacing with commercial panels.
	(On residential panels, this box is
	automatically selected and cannot be
	deselected.)
	If this user is to be able to Arm and
	Disarm from other partitions in commercial
	panels, touch this box.
	8. Touch the box below the User
	Number. The "User Number" screen is
	displayed with the instructions to Enter 3
	Digits.
	Note: When assigning User Numbers for
	residential panels, enter 0 as the first of
	the three digits.

9.Enter the 3-digit user number for this user. The “User Options” screen is displayed with the user’s name, number, and code displayed.

10.If this user is assigned an RF button zone, touch the box below the RF Button Zone. The "RF Button Zone " screen is displayed with the instructions to enter 3 digits. If interfacing to a residential panel, enter 0 as the first digit. Enter the RF Button Zone number that was previously programmed in the control panel. Note that the RF Button Zone does not appear for every user. The User Options screen will be redisplayed.

11.Press the SAVE button. The system will save the configuration. When the save is complete, the User Setup screen is displayed with the new user’s name shown.

37