Security System Operation (cont'd)
How to Send Emergency Messages
•Emergency messages are optional and may not be available on your system. Ask your system installer if emergency messages are available on your system.
•The Emergency screen cannot be accessed while running a screen diagnostic test or while in the clean screen mode.
An emergency message for fire, panic, or medical can be sent to the central monitoring station from the Emergency screen. The Emergency screen can be accessed by activating the "PANIC" Icon located on the lower right corner of the screen.
Once the Emergency screen is accessed, perform the following to send an emergency message.
SCREEN | ACTION |
|
|
| On the Emergency screen press and hold |
| (for at least 2 seconds) the associated |
| alarm button for the type of emergency |
| message you want to send (FIRE, PANIC, |
| or MEDICAL). When the message is |
| sent, the associated "Message Sent" |
| statement is displayed in the text box to |
| the right of the buttons. You are |
| immediately returned to the screen from |
| which you pressed the “PANIC” Icon. |
|
|
28
