Honeywell 6271 manual Security System Operation contd, Screen, Action

Security System Operation (cont'd)

SCREEN	ACTION
	2. On the "Arming" screen, press the
	selected arming button.
	Note: If Quick Arm is Not enabled in your
	system, you will receive a message to
	enter your User Code.
	o The TouchCenter beeps twice
	(Away and Night Maximum Modes) or
	3 times (Stay and Night Instant
	Modes)
	o a DISARM button appears
	o a text message appears stating
	which zones are arming and whether
	or not there is an entry delay
	o the screen changes to display
	the remaining exit delay time, and
	o an "open lock" appears next to
	the arming buttons as follows:
	Away – Next to the Away button
Arming (typical)	Stay – Next to the Stay button
	Instant – Next to the Night button
	Night – Next to the Night button
	o The exit delay time continues to
	count down to one.
	When exit delay time expires, the screen
	automatically changes to indicate the
	system is "Armed" and the "lock" next to
	the button changes color and to a closed
	lock. The system is now armed in the
	selected mode.
Armed (typical)

16