Venting Instructions, A. Installations

Vermont Castings, Majestic Products RHE Natural Vent Insert

	TH
	TP
	TPTH
	FP1218a
Fig. 8b	ON/OFF switch wiring.

If a remote wall switch is required for this fireplace installation, do not wire wall switch to 120V power supply.

Venting Instructions

Canadian Installations:

The venting system must be installed in accordance with the current CSA-B149.1 installation code, and the authority having jurisdiction.

U.S.A. Installations:

The venting system must be installed in accordance with the current National Fuel Gas Code, ANSI Z223.1.

Minimum clearances to combustible materials is 1" (25mm) for B Vent (use of single wall vent is not allowed).

As with any natural draft appliances, the vent cap must always extend a minimum of 2' (610mm) above any structure within a 10' (3m) horizontal plane. (Fig. 9)

	0 To 10’
	2’ Min.	0 To 10’
	3’	0 To 10’
	Min.	(3m)
		2’	3’
		(610mm)	3’
		Min.	(914mm)
			Min.
	Reference
	Point
			AC246a
Fig. 9	Example of the 2', 3', 10' rule.

A minimum 12' (3.7m) vent height is required to effectively vent this fireplace.

Venting and Installation

Installer must attach red warning plate with screws supplied with the gas fire- place insert to the inside of the firebox of the fireplace into which the gas fireplace insert is installed.

WARNING

This fireplace has been converted for use with gas only and cannot be used for burning wood or solid fuels unless all original parts have been replaced and the fireplace has been re-approved by the authority having jurisdiction.

Cutting any sheet metal parts of the fireplace, in which the gas fireplace insert is to be installed, is prohibited.

If the factory-built fireplace has no gas access hole(s) provided, an access hole of 1¹⁄₂" (37.5mm) or less may be drilled through the lower sides or bottom of the firebox in a proper workmanship like manner. This access hole must be plugged with a noncombustible insulation after the gas supply line has been installed.

Ensure there are no obstructions to side air passages of decorative trim once installed on insert.

WARNING

Some factory built fireplaces have air passages on face of fireplace for zero clearance capabili- ties. All trim kits are designed so as to allow airflow to these passages. Under no circum- stances should these passages be blocked.

1.The Majestic gas inserts are designed for recessed installations into solid fuel Masonry or Factory Built Noncombustible fireplaces that have been installed in accordance with the National, Provincial, State and local building codes.

2.Measure for minimum fireplace opening requirement on Page 4 of this installation manual. (If firebrick [refractory] is removed from a factory built fireplace in order to gain minimum gas fireplace insert opening requirements, a minimum of 1/4" (6.4mm) air space is required between the gas insert fireplace's outer casing and the inner wall of the factory built fireplace).

3.To assure top performance, safety and efficiency, all inserts must be installed with an approved 4" diameter flue liner, with exception of RHE25, which should be installed with an approved 3" liner,as per CSA-B.149 or National Fuel Code ANSI Z223.

10000836

RHE25, RHE32, RHE42 specifications

Vermont Castings has long been a trusted name in the world of cast iron stoves and fireplaces, known for their timeless design and superior craftsmanship. Among their impressive lineup are the RHE42, RHE32, and RHE25 gas fireplaces, each tailored to meet varying needs while elevating the ambiance of any space.

The RHE42 is a standout appliance, boasting a generous heating capacity suitable for larger areas. Its expansive viewing area allows for an impressive flame display, creating a captivating centerpiece for any room. One of the key features of the RHE42 is its advanced burner system, which delivers an even heat distribution and optimal efficiency. Homeowners will appreciate the programmable remote control, providing effortless adjustments to temperature and flame height, enhancing the overall user experience.

Moving to the RHE32, this model strikes an ideal balance between compact size and robust heating performance. Designed for medium-sized rooms, the RHE32 maximizes efficiency without compromising style. With a variety of customizable front finishes and decorative options, this fireplace can seamlessly fit into any decor. The optional blowers enhance heat circulation, ensuring that warmth reaches every corner of the room. The RHE32 is also equipped with a user-friendly electronic ignition system, enabling quick and reliable startup.

The RHE25 is Vermont Castings' smaller yet equally impressive offering. This model caters to those needing a fireplace with a space-saving design while still delivering ample warmth. Ideal for smaller living areas or even as an efficient supplemental heat source, the RHE25 emphasizes environmentally friendly heating with its low emissions and high efficiency. The beautiful cast iron construction not only adds to its aesthetic appeal but also ensures longevity and durability. The easy-to-use controls, alongside the compact design, make it perfect for any homeowner looking for convenience without sacrificing quality.

All three models feature Vermont Castings' signature cast iron construction, ensuring not only durability but also superior heat retention. With an eye on energy efficiency, these fireplaces are designed to meet high efficiency ratings, contributing to reduced heating costs and lower environmental impact. The combination of striking aesthetics, state-of-the-art technology, and superior performance makes the RHE42, RHE32, and RHE25 exceptional choices for anyone looking to enhance their home heating experience. Whether you desire a grand centerpiece or a compact heating solution, Vermont Castings delivers options that cater to every taste and need.