Vermont Casting DBT33, DBT36 Clearance to Combustibles, Mantels, Hearth, Framing and Finishing

Page 5

CLEARANCE TO COMBUSTIBLES

Appliance

 

Top

0 mm (0")

Bottom

0 mm (0")

Side

0 mm (0")

Back

0 mm (0")

Venting

 

Concentric sections of DV Vent

Top, bottom & sides .. 25 mm (1")

MANTELS

 

 

The height that a combustible mantel is tted above the re-

 

place is dependent on the depth of the mantel. This also applies

 

to the distance between the mantel leg (if tted) and the

 

replace.

 

For the correct mounting height and widths refer to Fig. 2 and

 

the following Mantel Charts.

 

HEARTH

The tting of a bay window trim kit does not effect the

distances and reference points referred to in the diagram and

A Hearth is not mandatory but it is recommended for aesthetic

chart.

purpose. We recommend a non-combustible hearth which

Non-combustible mantels and legs may be installed at any

projects out 12" (305 mm) or more from the front of the

height and width around the appliance.

replace.

When using paint or lacquer to nish the mantel, such paint or

Cold climate Installation Recommendation:

lacquer must be heat resistant to prevent discolouration.

 

 

When installing this unit against a non-insu-

 

 

 

 

lated exterior wall or chase, it is mandatory that

 

 

the outer walls be insulated to conform to appli-

 

 

cable insulation codes.

 

 

 

FRAMING AND FINISHING

 

1.

Choose the unit location.

 

2.

Place the unit into position and secure it to the oor with

 

 

 

1.5" (38 mm) screws, or nails. The holes to secure the

 

 

 

unit to the oor are located just behind the access door

 

 

 

grille on the left and right side of the unit.

 

3.

Frame in the replace with a header across the top. It is

 

 

 

important to allow for the nished wall face when setting

 

 

 

the depth of the frame.

 

4.

Attach the replace to the frame using the adjustable

 

 

 

frame drywall strips (located behind the access door for

 

 

 

shipping). Preset the depth to suit the facing material of

 

 

 

the wall. The strips are adjustable to 1/2"(13 mm), 5/8"

 

 

 

(16 mm) or 3/4" (19 mm), Fig. 3 & 4.

 

5.

Screw through the slotted holes in the drywall strip and

 

 

 

into the pre-drilled holes in the replace side. Measure

 

 

 

from the face of the replace to the face of the drywall

 

Fig. 2

strip to conrm the nal depth.

 

 

 

 

 

 

10002789/0

-5-

 

DBT33/DBT36/DBT39

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DBT33 DBT36 DBT39 Table of Contents Locating Your Fireplace Installation & O Perating InstructionsFraming Dimensions Appliance DimensionsAppliance Dimensions Mantels Clearance to CombustiblesHearth Framing and FinishingGAS Inlet & Manifold Pressures GAS SpecificationsFinal Finishing Remote ON/OFF Switch GAS Line InstallationInstallation Alternative Switch LocationNatural GAS to LP Converting the ApplianceFrom LP to Natural GAS or Location of Vent Termination General Venting Information Termination LocationDBT33/DBT36/DBT39 General Information on Assembling DV Components HOW to USE the Vent GraphCrimped End Pipes Twist Lock PipesVertical Sidewall Applications Install restop assembly Fig Vertical Sidewall InstallationsApply high temperature sealant to 4 100 mm and 7 Below Grade InstallationsThis Gas Fireplace has been approved for Vertical THROUGH-THE-ROOF ApplicationsFitting The Restrictor Plate Vertical Restrictor PlatePlace replace into position Vertical THROUGH-THE-ROOF Installation7DVP3466 Crimped END Venting Components7DVP1834 Twist Lock Venting Components Glass Cleaning General MaintenanceGeneral Operating Instructions Glass Information Louvre RemovalLocation Installation of Logs Lava RockRN/RP & EN/EP Models Flame & Temperature AdjustmentFlame Characteristics Settle on the oor Turn on all electrical power to the replaceTrouble Shooting the GAS Control System Defective ignitor Push Button Pilot. If no spark to pilot, and electrode wire is properlyConnected, replace ignitor Thermopile and thermocoupleReplacement Parts List Description Parts Pictorial FK24 Fan Assembly Optional Accessories Available EB-1 Electrical BOXMaintenance FAN KitsFK12 Wiring InstructionsMethod a Method BReplace the logs and frame/glass assembly Installation, refer FigCeramic Refractory Kits Front Window ScreenModel Function/s Controlled Remote ControlsDecorative BAY Windows Page Limited Warranty & Extended Life Time Protection

DBT39, DBT36, DBT33 specifications

Vermont Castings has long been a name synonymous with quality and craftsmanship in the realm of cast iron stoves and fireplaces. Among their range, the DBT33, DBT36, and DBT39 models stand out due to their unique features and advanced technology, designed to meet the varying needs of homeowners looking for an efficient heating solution.

The DBT33 model offers a compact yet powerful design, making it ideal for tighter spaces while still delivering robust heating capabilities. With a BTU output of up to 33,000, it can effectively warm a medium-sized room. One of its main features is the advanced air wash system that helps keep the glass clean, providing you with an unobstructed view of the mesmerizing flames. It’s equipped with Vermont Castings' patented Intelli-Fire technology, which provides a user-friendly operation, ensuring optimal efficiency and performance.

Moving up in size and features, the DBT36 is built for slightly larger spaces but retains the same elegant design and efficiency. It boasts a BTU output of up to 36,000, making it suitable for larger rooms or even open-concept spaces. One standout characteristic is its built-in thermostat that automatically adjusts the burner to maintain a consistent temperature. This model also incorporates a secondary combustion system, which boosts efficiency and reduces emissions, making it an eco-friendlier choice.

Finally, the DBT39 takes it a step further with a powerful output of up to 39,000 BTUs, perfect for heating expansive areas. It features a sleek design that fits seamlessly into various home aesthetics, whether modern or traditional. Notably, the DBT39 is designed with multiple burning modes, allowing users to choose between high heat for quick warmth or lower settings for prolonged, even heat. Its innovative heat exchanger design improves heat transfer, ensuring maximum efficiency while lowering fuel consumption.

All three models utilize Vermont Castings' renowned cast iron construction, which not only enhances durability but also improves heat retention. They also come equipped with safety features such as a built-in heat shield to prevent overheating, ensuring peace of mind for users.

In summary, the Vermont Castings DBT series – DBT33, DBT36, and DBT39 – offers a range of options tailored to various heating needs. Their combination of stylish design, robust performance, and advanced technologies sets them apart in the market, appealing to homeowners who value both functionality and aesthetics in their heating solutions. With Vermont Castings, warmth and elegance go hand in hand.
Top Page Image Contents