CR Series Woodburning Fireplaces
Accessory | Description | Model No. |
|
|
|
Chimney Support |
|
|
| Used to support the chimney at each | SKCS8 |
| 30 feet of vertical height above the | (8” flue) |
| hearth and at every 6 feet of inclined |
|
| chimney run. Each support adds 2¹⁄₂ |
|
| inches to chimney length. |
|
Firestop
Required at each floor level and attic | SKFS2A (8” straight flue) |
on | SKFS6A (8” 30° inclined flue) |
Top Housings
Gives traditional chimney top look | S20BR/BT/BW |
using simulated brick in red, tan or |
|
white color. Brick pattern is em- |
|
bossed into galvanized steel unit. |
|
Roof flashing is included. Appropri- |
|
ate adapter is required. |
|
See Sections 2 and 3. |
|
Housing Extensions
Required to extend Traditional Top | 202036 |
Housings on steeply pitched roofs. | (single flue) |
| 204436 |
| (double flue) |
Contemporary Chase Top | Used to terminate chimney at the |
|
Terminations |
| |
| top of a chase. Flashing is not | SLTSK8 |
PLTSK8 | included. Appropriate adapter is | or |
| required. See Sections 2 and 3. | PLTSK8 |
SLTSK8
20001316 | 19 |