Vermont Casting 2160 manual Specifications, Sequoia, Model

Dutchwest Sequoia

Specifications

Sequoia, Model 2160

Range of heat output	10,400 to 31,700 Btu’s/hr.***
Maximum heat output	50,000 Btu’s/hr.*****
Maximum burn time	8 hours*

Area heated** .... 1,000-2,000 Square feet (65-130m2)

Log lengths	23” (580mm)
Loading	Side or Front
Chimney Flue Size	6” (150mm) or 8” (203mm)
Flue exit position	Reversible, Top or Rear
Weight	540 lbs. (245kg.)
Air Control	3 controls
Width	26” (660mm)
Depth	15¹⁄₂” (395mm)
Height
w/6” standard legs	Top exit: 29¹⁄₂” (750mm)
......................................	Rear exit: 30¹⁄₂” (775mm)
w/Pedestal	Top exit: 32³⁄₄” (835mm)
......................................	Rear exit: 33³⁄₄” (855mm)

*General guidelines only; may vary with fuel type, moisture content, load size and installation variables.

**These values are based on operation in building-code conforming homes under typical winter climate condi- tions in New England. If your home is of nonstandard construction (e.g., unusually well-insulated, not insu- lated, built underground, etc.) or if you live in a more severe or more temperate climate, these figures may not apply. Since so many variables affect stove sizing, consult your local dealer to determine realistic expecta- tions for your home.

***These values were obtained under specific labora- tory test conditions using Douglas fir dimensional lumber test fuel.

****These values can vary depending on how the stove is operated, the type and moisture content of the fuel used, as well as the design, construction and climate location of your home. Figures shown are based on maximum fuel consumption obtained under laboratory conditions using cordwood fuel and on average wood stove efficiencies.

Top of Collar,

Rear Exit

8" - 30¹⁄₂" (760mm) 6" - 30⁵⁄₈" (762mm)

Center of Collar,

Rear Exit

8" - 28" ( 710mm) 6" - 27³⁄₈" (695mm)

25"

(640mm)

22¹⁄₄"

(565mm)

25" (640 mm)

19" (480mm)

30"

(750mm)

17¹⁄₂" (450mm) 25¹⁄₂" (650mm)

Fig. 1 Sequoia specifications.

2001049 3