Dover Finishing Products 2220, 2210, 2200, 2020, 2510, 2500, 2520 manual Maintenance

Page 18

6.Maintenance

It takes only little effort to keep your appliance in good condition.

Regularly check whether the sealing cord still closes the doors tightly enough.

Minor paint damage can be touched up with a can of spray paint. Your dealer can supply you with the correct spray product.

During the first use after repainting your unit might give off some slight odour. However, this will disappear quickly.

The glass can be cleaned with a number of glass cleaning products available on the market. Your installer can also supply you with appropriate products. However, never use abrasive or corrosive cleaning products.

At the end of the heating season, seal off the chimney with a ball of paper. You can then thoroughly clean the stove on the inside.

If necessary, replace the sealing ropes and use fire cement to fill up possible leaks. Remove the fireplate for better and more thorough cleaning.

To remove the doors, disassemble the hinges as shown.

You should have your chimney swept by an expert before the heating season begins. It is useful to check the chimney for soot during the heating season as well. Check- ing and maintaining the chimney is a statutory requirement.

When all of the above advice is heeded, you will be able to fully e njoy your stove.

2020/2220/2520/2210/2510/2200/2500

18

03.27883.100

Image 18
Contents 2020/2220/2520/2210/2510/2200/2500 Table of contents Safety ForewordIntroduction Principle Installation guideline Preparatory measuresChimney Ventilation Floor round the appliance Floor, wallsUnder the appliance Walls, ceilingChanging the direction of the door-opening Outside the radiation area of the fireplacePreparation Removing the clapetFitting frame surround Assembling the cold handle Electrical connectionInstallation To be built into a new chimneyTo be built in a existing chimney Finishing Packaging materialsBuildup Existant chimney Instructions for use FuelLighting a fire Burning wood Burning coalAsh removal Extinguishing the fireWeather conditions Maintenance Model Annex 2 Dimensions 2510S 2210S 2220 2520S 2510D 2020S 2520S/2/3 03.27883.100 0608