Desa Tech RFP28TC installation manual Top, Gas leak. See Warning statement at

Page 19

OWNER’S MANUAL

TROUBLESHOOTING

Continued

WARNING: If you smell gas

•Shut off gas supply.

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

IMPORTANT: Operating heater where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors.

OBSERVED PROBLEM

POSSIBLE CAUSE

REMEDY

Heater produces a clicking/ticking noise just after burner is lit or shut off

1.Metal expanding while heating or con- tracting while cooling

1.This is common with most heaters. If noise is excessive, contact qualified ser- vice person

Heater produces unwanted odors

1.

Heater burning vapors from paint, hair

 

 

spray, glues, etc. (See IMPORTANT

 

 

statement above)

 

2.

Low fuel supply

 

3.

Gas leak. See Warning statement at

 

 

top of page

1.Ventilate room. Stop using odor caus- ing products while heater is running

2.Refill supply tank

3.Locate and correct all leaks (see Check- ing Gas Connections, page 14)

Heater shuts off in use (ODS operates)

1.

Not enough fresh air is available

1.

Open window and/or door for ventilation

 

2.

Low line pressure

2.

Contact local propane/LP gas company

 

3.

ODS/pilot is partially clogged

3.

Clean ODS/pilot (see Cleaning and

 

 

 

 

Maintenance, page 20)

 

 

 

 

 

Gas odor even when control knob is in OFF

1.

Gas leak. See Warning statement at

1.

Locate and correct all leaks (see Check-

position

 

top of page

 

ing Gas Connections, page 14)

 

2.

Control valve defective

2.

Replace control valve

 

 

 

 

 

Gas odor during combustion

1.

Foreign matter between control valve

 

 

and burner

 

2.

Gas leak. See Warning statement at

 

 

top of page

1.Take apart gas tubing and remove for- eign matter

2.Locate and correct all leaks (see Check- ing Gas Connections, page 14)

Moisture/condensation noticed on windows 1. Not enough combustion/ventilation air

1. Refer to Air for Combustion and Venti-

 

lation requirements (page 6)

103509

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation Manual RFP28TCVENT-FREE Radiant Flame Heater Safety InformationUnpacking Product FeaturesProduct Identification Local CodesRemoving Front Panel Of Heater AssemblyInstalling Log Assembling HeaterAssembling Brass Trim Assembling and Attaching Brass TrimConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionDetermining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Check GAS Type InstallationInstallation Items Locating HeaterThermostat Sensing Bulb Installation OptionsMounting Heater to Wall Attaching To Wall Anchor Method Installing Bottom Mounting ScrewsPlacing Heater On Mounting Bracket To Optional Mantel Mounting Heater onOptional Hearth Base Mounting Heater withInstalling Mantel to Heater Connecting to GAS SupplyTest Pressures In Excess Of 1/2 Psig Pressure Testing Gas Supply Piping SystemPressure Testing Heater Gas Connections Checking GAS ConnectionsTo Turn OFF GAS To Appliance For Your Safety Read Before LightingOperating Heater Lighting InstructionsPilot Flame Pattern Manual Lighting ProcedureInspecting Burner Thermostat Control OperationObserved Problem Possible Cause Remedy TroubleshootingObserved Problem Possible Cause Gas leak. See Warning statement at TopTechnical Service Cleaning and MaintenanceSpecifications Service HintsFour Flags Power Products Replacement Parts Parts CentralsParts Under Warranty Parts not Under WarrantyRFP28TC Illustrated Parts BreakdownKEY Part Number Description Parts ListAccessories 103509 Warranty Information

RFP28TC specifications

Desa Tech RFP28TC is an advanced piece of technology that stands out in today’s competitive market. This robust device is designed to meet the diverse needs of various industries, from manufacturing to healthcare, ensuring efficient operations and seamless functionality.

One of the main features of the RFP28TC is its high processing power and speed. Equipped with a state-of-the-art processor, it can handle multiple tasks simultaneously without any lag. This enhances productivity, allowing businesses to maximize their output and minimize downtime.

The RFP28TC is built using cutting-edge technologies that ensure durability and reliability. Its robust chassis is designed to withstand harsh working conditions, making it ideal for environments such as factories and distribution centers. Furthermore, its energy-efficient design helps reduce operational costs, contributing to sustainability efforts while providing consistent performance.

In terms of connectivity, the RFP28TC offers a variety of options, including Wi-Fi, Bluetooth, and Ethernet. This versatility allows for seamless integration into existing networks, enabling real-time data sharing and communication across devices. Such a feature is particularly beneficial for companies looking to implement Internet of Things (IoT) solutions, where interconnected devices work together to optimize efficiency.

The user interface of the RFP28TC is designed with usability in mind. Featuring an intuitive touchscreen, it allows users to navigate through various applications effortlessly. This ease of use reduces the learning curve for new operators and ensures that employees can get to work quickly.

Another notable characteristic of the RFP28TC is its comprehensive support for various software applications. Whether it’s for inventory management, data analytics, or customer relationship management, the device supports a wide range of platforms, making it suitable for different sectors. This flexibility means that businesses can customize their technology to fit their specific needs.

Security is a top concern for many organizations, and the RFP28TC addresses this with advanced encryption and access control features. These security measures protect sensitive information, ensuring compliance with industry regulations and safeguarding against potential threats.

In conclusion, the Desa Tech RFP28TC is a powerful and flexible solution that combines high performance, robust design, and advanced connectivity. Its user-friendly interface and extensive software compatibility make it an invaluable tool for businesses across various industries, driving efficiency and innovation while prioritizing security and reliability.
Top Page Image Contents