Desa Tech RFP28TC installation manual VENT-FREE Radiant Flame Heater, Safety Information

Page 2

VENT-FREE RADIANT FLAME® HEATER

SAFETY

INFORMATION

WARNINGS

IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, oper- ate, or service this heater. Im- proper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poi- soning.

DANGER: Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning re- semble the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

Propane/LP Gas: Propane/LP gas is odor- less. An odor-making agent is added to propane/LP gas. The odor helps you detect a propane/LP gas leak. However, the odor added to propane/LP gas can fade. Propane/ LP gas may be present even though no odor exists.

Make certain you read and understand all warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

WARNING: Any change to this heater or its controls can be dangerous.

1.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

2.Do not place propane/LP supply tank(s) inside any structure. Locate propane/ LP supply tank(s) outdoors.

3.If you smell gas

•shut off gas supply

•do not try to light any appliance

•do not touch any electrical switch; do not use any phone in your building

•immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

•if you cannot reach your gas supplier, call the fire department

4.This heater shall not be installed in a bedroom or bathroom.

5.Never install the heater

•in a recreational vehicle.

•where curtains, furniture, clothing, or other flammable objects are less than 36 inches from the front, top, or sides of the heater.

•as a fireplace insert.

•in high traffic areas.

•in windy or drafty areas.

6.This heater needs fresh, outside air ven- tilation to run properly. This heater has an oxygen depletion sensor (ODS) pi- lot light safety system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, pages 6 through 8.

7.If heater shuts off, do not relight until you provide fresh, outside air. If heater keeps shutting off, have it serviced.

8.Do not run heater

•where flammable liquids or vapors are used or stored.

•under dusty conditions.

9.Never place any objects on the heater.

10.Surface of heater becomes very hot when running heater. Keep children and adults away from hot surface to avoid burns or clothing ignition. Heater will remain hot for a time after shutdown. Allow surface to cool before touching.

11.Carefully supervise young children when they are in same room with heater.

12.Make sure screen is in place before run- ning heater.

13.Before using furniture polish, wax, car- pet cleaner, or similar products, turn heater off. If heated, the vapors from these products may create a white pow- der residue within burner box or on adjacent walls or furniture.

14.Do not use heater if any part has been under water. Immediately call a quali- fied service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

15.Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater.

16.Operating heater above elevations of 4,500 feet may cause pilot outage.

WARNING: Do not use a blower insert, heat exchanger insert, or other accessory not approved for use with this heater.

17.To prevent performance problems, do not use propane fuel tank of less than 100 lbs. capacity.

2

103509

Page 1 Page 3
Image 2
Page 1 Page 3
Contents OWNER’S Operation and Installation Manual RFP28TC What to do if YOU Smell GASSafety Information VENT-FREE Radiant Flame HeaterLocal Codes Product FeaturesProduct Identification UnpackingAssembling Heater AssemblyInstalling Log Removing Front Panel Of HeaterAssembling and Attaching Brass Trim Assembling Brass TrimUnusually Tight Construction AIR for Combustion and VentilationProviding Adequate Ventilation Confined and Unconfined SpaceDetermining if You Have a Confined or Unconfined Space AIR for Combustion VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Locating Heater InstallationInstallation Items Check GAS TypeMounting Heater to Wall Installation OptionsThermostat Sensing Bulb Placing Heater On Mounting Bracket Installing Bottom Mounting ScrewsAttaching To Wall Anchor Method Mounting Heater with Mounting Heater onOptional Hearth Base To Optional MantelConnecting to GAS Supply Installing Mantel to HeaterChecking GAS Connections Pressure Testing Gas Supply Piping SystemPressure Testing Heater Gas Connections Test Pressures In Excess Of 1/2 PsigLighting Instructions For Your Safety Read Before LightingOperating Heater To Turn OFF GAS To ApplianceThermostat Control Operation Manual Lighting ProcedureInspecting Burner Pilot Flame PatternTroubleshooting Observed Problem Possible Cause RemedyObserved Problem Possible Cause Top Gas leak. See Warning statement atService Hints Cleaning and MaintenanceSpecifications Technical ServiceParts not Under Warranty Replacement Parts Parts CentralsParts Under Warranty Four Flags Power ProductsIllustrated Parts Breakdown RFP28TCParts List KEY Part Number DescriptionAccessories 103509 Warranty Information

RFP28TC specifications

Desa Tech RFP28TC is an advanced piece of technology that stands out in today’s competitive market. This robust device is designed to meet the diverse needs of various industries, from manufacturing to healthcare, ensuring efficient operations and seamless functionality.

One of the main features of the RFP28TC is its high processing power and speed. Equipped with a state-of-the-art processor, it can handle multiple tasks simultaneously without any lag. This enhances productivity, allowing businesses to maximize their output and minimize downtime.

The RFP28TC is built using cutting-edge technologies that ensure durability and reliability. Its robust chassis is designed to withstand harsh working conditions, making it ideal for environments such as factories and distribution centers. Furthermore, its energy-efficient design helps reduce operational costs, contributing to sustainability efforts while providing consistent performance.

In terms of connectivity, the RFP28TC offers a variety of options, including Wi-Fi, Bluetooth, and Ethernet. This versatility allows for seamless integration into existing networks, enabling real-time data sharing and communication across devices. Such a feature is particularly beneficial for companies looking to implement Internet of Things (IoT) solutions, where interconnected devices work together to optimize efficiency.

The user interface of the RFP28TC is designed with usability in mind. Featuring an intuitive touchscreen, it allows users to navigate through various applications effortlessly. This ease of use reduces the learning curve for new operators and ensures that employees can get to work quickly.

Another notable characteristic of the RFP28TC is its comprehensive support for various software applications. Whether it’s for inventory management, data analytics, or customer relationship management, the device supports a wide range of platforms, making it suitable for different sectors. This flexibility means that businesses can customize their technology to fit their specific needs.

Security is a top concern for many organizations, and the RFP28TC addresses this with advanced encryption and access control features. These security measures protect sensitive information, ensuring compliance with industry regulations and safeguarding against potential threats.

In conclusion, the Desa Tech RFP28TC is a powerful and flexible solution that combines high performance, robust design, and advanced connectivity. Its user-friendly interface and extensive software compatibility make it an invaluable tool for businesses across various industries, driving efficiency and innovation while prioritizing security and reliability.
Top Page Image Contents