General Glass Information

Only glass approved for use in Empire Comfort Systems, Inc. fireplaces may be used for replacement. The glass replacement should be done by a licensed or qualified service person.

WARNING:

1.The use of substitute glass will void all product warranties.

2.Care must be taken to avoid breakage of the glass.

3.Under no circumstances should this appliance be operated without the glass front or with a broken glass front. Replacement of the glass (with gasket) as supplied by the manufacturer should be done by a qualified service person.

4.Do not abuse the glass by striking or hitting the glass.

WARNING: Do not use abrasive cleaners on glass. Do not attempt to clean glass when glass is hot.

Failure to follow these warnings could cause a serious safety issue to the operator, such as fire or other serious conditions.

A replacement glazing/frame assembly shall be replaced as a complete unit as supplied by Empire Comfort Systems, Inc.

Figure 19

Installation of Logs (Figure 19 and Figure 20 )

1.Lower valve cover on firebox.

2.Release two door latches at bottom of firebox.

3.Grasp bottom of glass frame, pull forward until bottom of glass frame is removed from glass frame guide and pull downward until glass frame is removed from glass frame support top.

4.Remove logs from interior of firebox. Remove all protective packaging from logs and interior of firebox.

5.Align the two rear pins on the base with the two alignment holes on the underside of the rear log. Place the rear log onto the two rear pins on the base.

6.Align the two front pins on the base with the two alignment holes on the underside of the front log. Place the front log onto the two front pins on the base.

7.Align the two alignment holes on the underside of the top log with the alignment pins on the top of front log. Place the top log onto the two pins on the front log.

R-3450

8.Grasp bottom of glass frame, push upward and insert glass frame into glass frame support top, push inward and insert glass frame into glass frame guide.

9.Attach two door latches to bottom of firebox.

10.Installation of logs is completed.

Warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.

Avertissement: Risque de dommages ou de blessures si les pièces ne sont pas installées conformément à ce schéma et ou si de pièces autres que celles spécifiquement approuvées avec cet appareil sont utilisées.

Figure 20

Replacement of Gasket on Glass Frame Assembly and Front Flange on Inner Body

1.Remove casing top from outer casing.

2.Remove casing front from outer casing.

3.Lower valve cover on firebox.

4.Release two door latches at bottom of firebox.

5.Grasp bottom of glass frame, pull forward until bottom of glass frame is removed from glass frame guide and pull downward until glass frame is removed from glass frame support top.

6.Place glass frame assembly on a non-abrasive surface. The exterior of the glass frame assembly should be facing the non-abrasive surface.

7.Remove the (6) screws and (6) nuts on the glass frame assembly.

8.Remove the (2) 1" x 13-3/4" divider brackets from the glass frame assembly.

9.Remove the gasket that is to be replaced on the glass frame and front flange on inner body. Clean the glass frame and front flange on inner body before the new gasket is attached.

10.Remove the backing material from the gasket.

11.Place the gasket around each opening in the glass frame and around the front flange on inner body.

Page 13

CIBV-30-2 specifications

Empire Comfort Systems has long been a trusted name in the heating industry, providing reliable and efficient heating solutions for homes. One of their standout products is the CIBV-30-2 direct vent gas fireplace, which combines modern technology with aesthetic appeal.

The CIBV-30-2 is designed to deliver warmth and charm to any space while ensuring maximum efficiency. With a compact design, this model is perfect for smaller rooms or areas where space is at a premium. Its direct vent technology allows for the safe exhaust of combustion gases, which enhances indoor air quality. This feature makes the CIBV-30-2 an excellent choice for homeowners looking to enjoy the comfort of a fireplace without the concerns associated with traditional wood-burning options.

One of the key characteristics of the CIBV-30-2 is its capability to provide a steady heat output of up to 30,000 BTUs, ensuring that even the coldest days feel cozy. The fireplace operates on either natural gas or propane, catering to different user preferences and needs. This flexibility makes it an ideal option for various homes and setups. The unit’s efficiency rating is impressive, with a thermal efficiency of over 80%, which means less fuel is consumed while still delivering substantial heat.

Aesthetically, the CIBV-30-2 boasts a stunning view of the flames, thanks to its large glass front. This feature not only enhances the ambiance of the room but also allows easy monitoring of the fire. The fireplace is available with optional decorative rock or log sets, enabling homeowners to customize the look to suit their decor style.

Additionally, the CIBV-30-2 is equipped with advanced controls that allow for precise temperature management. Optional remote control features are available, giving users added convenience to adjust the settings from a distance. Safety is also a priority; the unit includes built-in safety features to prevent over-heating and ensure reliable operation.

In summary, the Empire Comfort Systems CIBV-30-2 direct vent gas fireplace combines efficiency, flexibility, and beauty, making it an excellent choice for anyone looking to enhance their home’s comfort and style. With its modern design, advanced technology, and user-friendly features, this fireplace stands out as a remarkable solution for heating and ambiance in any living space.