Troubleshooting, Do not, What to do if

Troubleshooting

This troubleshooting is for both Timer Control and Circuit Board style EF3. It will be stated if the troubleshooting relates only to one model.

DO NOT:

●Hold the ON / OFF BUTTON down for circuit board model or hold the start-up switch down for timer control. This is a momentary contact switch and can be damaged if held down too long.

●Service the stove with wet hands. The stove is an electrical appliance, which may pose a shock hazard if handled improperly. Only qualified technicians should deal with possible internal electrical failures.

●Remove any screws in the firebox without first lubricating them with penetrating oil.

WHAT TO DO IF:

1.The stove will not start.

2.The stove will not operate when hot.

3.The exhaust blower will not function normally.

4.The convection blower will not function normally.

5.Ignitor - Everything else in the stove operates but the ignitor will not light the pellets.

6.The auger motor does not function normally.

7.Control settings (heat level) have no effect on fire (Circuit Board Only).

8.The Dial-A-Fire has no effect on the fire (Timer Control).

9.The 200°F (93°C) high limit temperature sensor has tripped.

10.The stove will not shut off.

11.The stove keeps going out.

12.Light # 2 on Heat output bar flashing (Circuit Board Only).

*NOTE: All troubleshooting procedures should be carried out by qualified technicians or installers.

1.The stove will not start. General:

● Make sure the stove is plugged in and the wall outlet is supplying power.

●With the stove unplugged, examine all connections. Make sure they are firmly connected and that there are no exposed wires touching the stove (except the chassis ground wire).

●Check the continuity and placement of connections against the Wiring Diagrams in this manual.

●If the unit still does not start after trying the below, contact your local dealer for service.

Circuit Board:

□If the Control Board has been placed in the ON /OFF thermostat mode, then turn the thermostat up to call for heat.

□Check the Heat Level Indicator. - If the # 2 light is flashing (see the # 2 light is flashing)

□Check the fuses on the circuit board (see “Troubleshooting - Fuses”).

Timer Control:

◊Push the Start-up switch. If the stove fails to start, unplug the unit and open the hinged side panels (held tight with two screws).

◊Ensure that the connections to the fifteen (15) minute start-up timer are correct.

◊Attempt to bypass the switch by inserting a jumper wire between the red and white wires that attach to the switch. Plug the stove back in. If the stove starts, replace the switch.

◊If this fails, replace the fifteen (15) minute start-up timer.

EF3 specifications

The Enviro EF3 is an innovative and eco-friendly vehicle that is transforming the landscape of sustainable transportation. With a focus on efficiency, performance, and environmental responsibility, the EF3 represents a significant leap forward in automotive technology.

One of the standout features of the Enviro EF3 is its advanced electric powertrain. This vehicle is equipped with a state-of-the-art electric motor that provides impressive torque and acceleration while remaining silent and efficient. The electric motor is powered by a high-capacity lithium-ion battery pack, which can be charged quickly and has a long lifespan. This allows for extended driving ranges, making the EF3 ideal for both urban commuting and longer journeys.

The EF3 also incorporates regenerative braking technology, which captures energy that would otherwise be lost during braking. This innovative feature helps to recharge the battery while enhancing overall energy efficiency. As a result, drivers can enjoy longer trips and reduced charging frequency, while also minimizing the vehicle's overall environmental impact.

In terms of design, the Enviro EF3 boasts a sleek, aerodynamic profile that not only looks modern but also contributes to its overall efficiency. The vehicle's exterior is crafted using lightweight materials, which enhance performance and help to maximize range. Additionally, the spacious interior is designed with comfort and sustainability in mind. Eco-friendly materials are used throughout the cabin, ensuring that the EF3 remains a green choice even inside the vehicle.

Connectivity is another vital characteristic of the Enviro EF3. Equipped with the latest infotainment and navigation technologies, the vehicle offers seamless integration with smartphones and other devices. This feature allows drivers to access real-time traffic updates, manage charging schedules, and even control various vehicle settings from their mobile devices.

Safety is prioritized in the design of the EF3, with advanced driver-assistance systems (ADAS) that include features such as adaptive cruise control, lane-keeping assist, and collision avoidance technology. These systems work together to enhance driver confidence and ensure a safe driving experience.

In conclusion, the Enviro EF3 represents the future of sustainable transportation. With its electric powertrain, advanced technologies, aerodynamic design, and a strong focus on safety and connectivity, the EF3 is a versatile and eco-friendly vehicle that meets the demands of modern drivers while contributing to a healthier planet. As more consumers seek environmentally responsible choices, the Enviro EF3 stands out as a leading option in the electric vehicle market.