Enviro EG 28 owner manual Installation of Logset and Embers, Installing the Glowing Embers

Page 14

INSTALLATION OF LOGSET and EMBERS

INSTALLING THE GLOWING EMBERS

A bag of Rock Wool embers is provided for use on the burner.

CAUTION: Use only the type of ember material supplied with this appliance. Due to the amount of ember material there may be more than required.

If over time, through cleaning and servicing, these embers require replacement, contact your nearest ENVIROGAS dealer for replacement embers.

Remove the ember material from the plastic bag.

Cover the shaded areas in the diagram shown beside.

Totally fill these areas with glowing ember material.

DO NOT PACK DOWN. LEAVE

EMBER MATERIAL LOOSE.

CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE DOOR REMOVED

INSTALLING THE LOGSET

Carefully remove log from box. Check to ensure there is no damage. It is very important to install this log in its proper position to insure safe, optimum operating conditions.

•Open the front door.

•Place each piece of the log set into the firebox resting on the pins provided. Ensure that the holes in logs line up.

•Close the door and tighten securely.

Upon the first light up, watch for ignition to all burner ports. If a long delay is noted:

•First, wait for the appliance to cool down

•Open the front door of the appliance.

•Check to carefully re-position the embers making sure that burner ports are not plugged solid or blocked. (See adjusting the venturi section to adjust air for proper flame).

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For Your Safety What to do if YOU Smell GASSafety Precautions For Your SafetyCode Approvals Table of ContentsAssembly Instructions Clearances Deciding Where to Locate Your StoveDimensions Vent Terminal Clearances Planning Your Installation Simpson Duravent PartsHorizontal Installation FIG-13 FIG-14 Vertical Installation FIG-21FIG-22 Cathedral Ceiling Installation Spring Spacers Venting Into Class a Chimneys Mobile HomeInstallation of Logset and Embers Installing the Glowing EmbersOperating Instructions Lighting InstructionsTo Replace Door and Glass Assembly Maintenance and TechnicalCleaning of Glass For Cleaning the Inside of the FireboxTrouble Shooting Problem Possible Cause SolutionOrifice SIZES, Pressure and BTU’S Never USE AN Open Flame for Leak Testing ElectricalGAS Line Connection Natural GAS Propane GASInstalling Remote Thermostat or Wall Switch Parts and Accessories Installing or Removing the BlowerAdjusting the Venturi Fuel ConversionWarranty To a Maximum of Seven YearsParts List EG28 Freestanding ExplodedEC-059 Strip Installation Data Sheet Model EG 28 Direct Vent

EG 28 specifications

The Enviro EG 28 is an innovative environmental solution designed for efficient waste management and recycling. This versatile equipment is engineered to handle a variety of materials, making it an essential tool for waste processing facilities, recycling centers, and industrial applications. Its robust design and advanced technologies ensure optimal performance and reliability.

One of the main features of the Enviro EG 28 is its high-capacity processing capability. The system is capable of handling large volumes of waste, which increases operational efficiency and reduces the frequency of emptying and maintenance. This is particularly beneficial in high-demand environments where downtime must be minimized. The Enviro EG 28 also incorporates advanced sorting technology that allows it to differentiate between various materials, optimizing the recycling process and improving the quality of the end products.

The Enviro EG 28 utilizes cutting-edge sensors and artificial intelligence to enhance its operation. These smart technologies enable the system to automatically adjust to different types and sizes of waste materials, ensuring efficient sorting and processing. This adaptability is crucial in today’s ever-changing waste landscape, where contamination and mixed materials can pose significant challenges.

Another significant characteristic of the Enviro EG 28 is its eco-friendly design. It operates with reduced energy consumption compared to traditional waste management systems, reflecting a commitment to sustainability. The efficient use of energy not only lowers operational costs but also minimizes the environmental impact of waste processing activities.

Durability is a key attribute of the Enviro EG 28. Constructed from high-quality materials, it withstands the rigors of a demanding work environment. Its maintenance is straightforward, ensuring that organizations can keep operational disruptions to a minimum.

In summary, the Enviro EG 28 stands out in the waste management sector due to its high capacity, advanced sorting technology, smart sensors, energy efficiency, and durable construction. It represents a significant advancement toward more sustainable waste management practices, making it a valuable asset for any organization committed to environmental responsibility and operational excellence. As waste management continues to evolve, the Enviro EG 28 is poised to play a pivotal role in shaping the future of recycling and waste processing efficiency.
Top Page Image Contents