Enviro EG 28 owner manual Parts and Accessories, Installing or Removing the Blower

Page 20

PARTS AND ACCESSORIES

Service Parts available from your local Envirogas Dealer

Burner Control Assembly

Convection Blower

Natural Gas Pilot Assembly

Light Bulb Holder

Propane Pilot Assembly

Light Switch (momentary)

Door Bolt

Fan Controller

Relief Door Gasket

Log Set (with Embers)

Regulating Valve

Thermocouple

Piezo Igniter

Embers

Burner Switch

Thermopile

B-vent Spill switch 220°

Door Gasket

Orifice Blank

Convection Fan Sensor 120° (48°C)

Accessories

Gold trim Package

Low Voltage Thermostat

INSTALLING OR REMOVING THE BLOWER

The blower does not require lubrication.

1. Turn the unit off and remove the log set.

2.Remove the burner tray assembly by removing the screw on either side of the tray, between the front and rear burners. Lift the tray out.

3.Remove the 4-5/16” bolts that hold the blower mounting plate to the back firewall. Use a light lubricating oil on screws before removal.

4.Carefully pull the assembly into the firebox.

Install the blower onto the mounting bracket (blower outlets pointing through the two holes in the bracket) using the 4 screws provided.

5. Connect wires according to the wiring diagram. (If removing the blower, disconnect the blower leads from the harness. Remove the blower.)

6. Check mounting plate gasket and reverse steps 1 through 4.

20

Image 20
Contents For Your Safety What to do if YOU Smell GASSafety Precautions For Your SafetyCode Approvals Table of ContentsAssembly Instructions Clearances Deciding Where to Locate Your StoveDimensions Vent Terminal Clearances Planning Your Installation Simpson Duravent PartsHorizontal Installation FIG-13 FIG-14 Vertical Installation FIG-21FIG-22 Cathedral Ceiling Installation Spring Spacers Venting Into Class a Chimneys Mobile HomeInstallation of Logset and Embers Installing the Glowing EmbersOperating Instructions Lighting InstructionsMaintenance and Technical Cleaning of GlassTo Replace Door and Glass Assembly For Cleaning the Inside of the FireboxTrouble Shooting Problem Possible Cause SolutionNever USE AN Open Flame for Leak Testing Electrical GAS Line ConnectionOrifice SIZES, Pressure and BTU’S Natural GAS Propane GASInstalling Remote Thermostat or Wall Switch Parts and Accessories Installing or Removing the BlowerAdjusting the Venturi Fuel ConversionWarranty To a Maximum of Seven YearsParts List EG28 Freestanding ExplodedEC-059 Strip Installation Data Sheet Model EG 28 Direct Vent

EG 28 specifications

The Enviro EG 28 is an innovative environmental solution designed for efficient waste management and recycling. This versatile equipment is engineered to handle a variety of materials, making it an essential tool for waste processing facilities, recycling centers, and industrial applications. Its robust design and advanced technologies ensure optimal performance and reliability.

One of the main features of the Enviro EG 28 is its high-capacity processing capability. The system is capable of handling large volumes of waste, which increases operational efficiency and reduces the frequency of emptying and maintenance. This is particularly beneficial in high-demand environments where downtime must be minimized. The Enviro EG 28 also incorporates advanced sorting technology that allows it to differentiate between various materials, optimizing the recycling process and improving the quality of the end products.

The Enviro EG 28 utilizes cutting-edge sensors and artificial intelligence to enhance its operation. These smart technologies enable the system to automatically adjust to different types and sizes of waste materials, ensuring efficient sorting and processing. This adaptability is crucial in today’s ever-changing waste landscape, where contamination and mixed materials can pose significant challenges.

Another significant characteristic of the Enviro EG 28 is its eco-friendly design. It operates with reduced energy consumption compared to traditional waste management systems, reflecting a commitment to sustainability. The efficient use of energy not only lowers operational costs but also minimizes the environmental impact of waste processing activities.

Durability is a key attribute of the Enviro EG 28. Constructed from high-quality materials, it withstands the rigors of a demanding work environment. Its maintenance is straightforward, ensuring that organizations can keep operational disruptions to a minimum.

In summary, the Enviro EG 28 stands out in the waste management sector due to its high capacity, advanced sorting technology, smart sensors, energy efficiency, and durable construction. It represents a significant advancement toward more sustainable waste management practices, making it a valuable asset for any organization committed to environmental responsibility and operational excellence. As waste management continues to evolve, the Enviro EG 28 is poised to play a pivotal role in shaping the future of recycling and waste processing efficiency.