Regency Z2510L installation manual SET Warmhearth Into Position, Installing the Chimney System

Page 11

INSTALLATION

IMPORTANT: It is absolutely nec- essary to attach stand-offs to the unit to avoid combustion problems. Serious overheating of combusti- ble framing and possible fire may result if stand-offs are not properly installed.

IMPORTANT: Insulation extends forward to seal against the back of the WarmHearth masonry or non- combustible face.

SET THE

WARMHEARTH

INTO POSITION

1)Estimate the total weight of the fi replace system and surround materials such as brick, stone, etc., to be installed. Shipping weight is 715 lbs. and stripped weight is 460 lbs. Stripped weight refers to the weight of the product with bricks, door and any ac- cessories removed.

2)Measure the square footage of the fl oor space to be occupied by the system, sur- rounds and hearth extensions.

3)Note the fl oor construction, i.e. 2 x 10’s, (51 x 250 mm), single or double joists, type and thickness of fl oor boards and consult your local building code to determine if you need additional support.

4)Remove door, fi rebox bricks, louvers etc.

Note: Set aside Gold doors and louvers away from harsh chemicals and away from abrasive materials to avoid damage, e.g. muriatic acid for masonry wash will strip the gold plate on the door. Firebricks are fragile and should be handled with caution.

The fi replace may be installed directly on a combustible fl oor or raised on a platform of an appropriate height. Do not place fi replace on carpeting, vinyl or other soft fl oor coverings. It may, however, be placed on fl at wood, plywood, particle board or other hard surfaces. Be sure the fi replace rests on a solid continuous fl oor

or platform for support and to prevent cold air from entering the room from under the fi replace, if against an outside wall.

The fi replace may be positioned and then the framing built around it, or the framing may be constructed and the fi replace positioned into the opening.

The minimum ceiling height is 7 feet. When the unit is raised 4 inches above the fl oor the Regency Hearth Extension (Part# 000-910) is not required.Asuitable non-combustible hearth pad is mandatory in all installations.

INSTALLING THE CHIMNEY SYSTEM

Following are a set of general guidelines for installation of the chimney system. The more detailed installation manual supplied with the specifi c chimney system must be followed.

1)Using standard construction framing techniques, construct the opening for the chimney route up through the ceiling(s) and roof or through an outside chase. Framing must maintain adequate minimum air space clearance at all times.

CAUTION: Allow a minimum 2 in. chimney air space or as specifi ed by the owner's manual for the chimney, to combustible framing members throughout vertical or offset chimney installation.

2)Attach anchor plate/fi replace adaptor to the top of the fireplace. It is important that a tight seal be made with this part and the unit’s collar. This must be purchased with the chimney system.

3)Install fi restop, radiation shield, or attic insulation shield as required at each fl oor penetration (refer to Table 1 in this section). Check chimney manufacturer's framing opening sizes to allow for correct clear- ances. All parts must be listed.

4)The roof fl ashing should be installed making sure that alignment is correct with openings below.

5)Chimney lengths may now be added until the required height is reached. A minimum fl ue height of 16 ft. from the fl oor (or 12 ft. from the top of the unit) is mandatory (refer to Table 2, in this section for Flue Heights).

Theperformanceofyourunitisgovernedtoa verylargeextentby thechimneysystem.Too short a chimney can produce poor drafting which in turn can cause difficult start-up, dirty glass, smoking out door and even reduced heat output. Too tall a chimney may prompt excessive draft which can result in very short burn times and excessive heat output. The

chimney must extend at least 3 ft. above its point of penetration of the roof and be at least 2 ft. higher than any point on the roof, wall, or building within 10 ft. of it.

6)The raincap and storm collar should now be fastened to the top of the chimney. Install additional support(s) as indicated by chimney manufacturer's instructions.

SPECIAL NOTES:

1)Negative Pressure In The House. When there is no fi re in your unit there still should be suffi cient draft to draw smoke from a burning piece of paper held under the baffl e. If your installation is correct, smoke will go up the fl ue. If however, there is a problem with your installation, cold air may be com- ing down the fl ue into the room. This may be the case if your unit smokes on start-up with the door open, until the unit heats up. To overcome this problem, try closing an upstairs window and open a nearby window to pressurize the house. Note: the door can be open briefl y to start your fire but must

Regency Z2510 WarmHearth

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents WarmHearth Fireplace Regency Fireplace Product Table of Contents Safety Label for Z2510L Safety LabelOptions InstallationRegency Warmhearth Product DetailsImportant Please read and follow these rules for safety Dimensions and SpecificationsClearances Height Requirements Fireplace Enclosure FramingBuilding Structures Cannot Encroach on Chase Location FireplaceHearth Extension No stand-offs are requiredCanada Chimney System ConsiderationsChimney Height Chase EnclosureBefore YOU Start Installing STAND-OFFSInstallation Components SET Warmhearth Into Position Installing the Chimney SystemDo not use water, it will create a steam explosion Offset Chimney InstallationModel 1st Floor 2nd Floor into Attic Internal Blower with Thermo-Disc InstallingInstalling the Blower Systems Outside AIR KITInternal and External Blowers With a Thermodisc Parts List QtyGravity AIR Feed KIT Option External Blower with Thermo-DiscMaterials Required Installing Your Central Heating SystemInstallation Typical Floor Register Masonry Retainer Kit Option Non-Self Supporting, Thin Veneer Facades InstallationFinishing Warmhearth Completing the FacingExample Face of Fireplace Flush with Wall Sheathing Finishing DetailsCompleting the Mantle Masonry Liner Bricks Latch AdjustmentGlass Installation Secondary AIR Tube InstallationMaintenance MaintenanceSafety Guidelines Description Parts ListParts LIST- Firebox & Body Parts List BAFFLES, DOOR, Options Warranty Lifetime WarrantyInstaller Please complete the following information

Z2510L specifications

The Regency Z2510L is a standout device in the realm of advanced wireless communication. With its cutting-edge features and robust design, it’s specifically engineered to cater to the demands of both personal and professional use. This device is recognized for its reliable performance, making it a staple for users who require efficiency and versatility.

One of the key features of the Regency Z2510L is its exceptional connectivity options. Equipped with state-of-the-art wireless technology, the device supports multiple frequency bands, ensuring seamless communication across various platforms. This flexibility guarantees that users can stay connected, whether at home, in the office, or on the go.

The Z2510L also boasts an intuitive user interface that enhances the overall user experience. Its well-organized menu system allows users to navigate through various functions with ease, significantly minimizing learning curves. Whether it’s for initiating calls, sending messages, or accessing additional features, the interface is designed with user-friendliness in mind.

A noteworthy characteristic of the Regency Z2510L is its long-lasting battery life. The device is equipped with an energy-efficient battery that supports extended usage without frequent recharging. This aspect is particularly beneficial for professionals who are often on the move and cannot afford downtime. The battery performance is complemented by advanced power management technology, which optimizes usage and extends the overall lifespan of the device.

Durability is another hallmark of the Regency Z2510L. It's built to withstand various environmental conditions, making it a reliable choice for users in demanding situations. Whether exposed to dust, moisture, or extreme temperatures, the device maintains functionality and longevity.

Security features are paramount in today's digital age, and the Z2510L does not disappoint. It incorporates robust encryption protocols designed to safeguard communications. This focus on security ensures that sensitive information remains protected, offering peace of mind to users concerned about data breaches.

Moreover, the Regency Z2510L is equipped with advanced audio technology, providing crystal-clear sound quality during calls. Enhanced noise cancellation features ensure that conversations are uninterrupted and clear, even in busy settings.

In summary, the Regency Z2510L represents a blend of functionality, durability, and advanced technology. With its user-centric design, powerful connectivity, and a host of remarkable features, it serves as a reliable tool for anyone seeking efficient communication solutions. Whether for personal or professional use, the Z2510L is poised to meet the demands of today’s fast-paced world.
Top Page Image Contents