Regency Z2510L Installing Your Central Heating System, Materials Required, Installation

Page 15

INSTALLATION

5)Install the connector collar into the unit making sure it is pushed all the way down. Reach through the upper louver opening and snip and bend out the lower edge of the collar in at least 4 places inside the fi replace with pliers so it can't be pulled out.

Flex Vent

Use high temperature silicone to seal the

2)

Metal ducting, grills and distribution boxes.

block-off plate to the unit. If necessary drill

 

(Installer Supplied)

extra holes in the plate and the unit and

3)

Ducting is tested at 1 in. clearance to fram-

secure with extra screws.

 

 

ing for the fi rst 6 feet and 1/2 in. thereafter

Note: Make sure the block-off plate is fl ush and

 

and no stand-offs are required. All ducting

fastened tightly to the WarmHearth.

 

should be insulated to reduce heat loss.

6)Slide the collar into the flex duct. secure with an adjustable clamp. Snip and bend out the outer edge of the collar in at least 4 places inside the frame so it can't be pulled out.

7)Drill holes or use nails to attach the Vent Frame to the wall. Note: holes in frame are used to attach the Vent cover.

IMPORTANT: Make sure the front edge of the collar is flush with the front edge of the air vent frame.

Note: The flex duct can easily be trimmed shorter or stretched longer.

Note: Termination boxes require a 14-1/2"W x 15-3/8"H opening in com- bustible materials.

8)Locate and install the lower air vent next. A 7-3/4" x 7-3/4" opening is required to fi t the frame that is supplied. The vent must be installed in the chase and should be within 12" of the fl oor.

WARNING: Lower air vent MUST be installed in all applications, otherwise serious overheating of the chase may result.

9)Fastentheblock-offplatetotheWarmHearth using the existing holes that normally secure the louvers, using the louver screws. Make sure the top edge is up.

Important:Atight joint between ma- sonry and the fireplace is necessary to prevent heat from rolling up the front to the Face Header.

INSTALLING YOUR CENTRAL HEATING SYSTEM

The WarmHearth may be used as a central forced air heating unit by adding ducting and a fan.

Materials Required:

1)Blower requirements: see Options 2 and 3 in section "F) Installing the Blower Sys- tems"

CAUTION: Blowers must meet specificationslisted(refertoInstall- ing the Blower Systems section). A home fire may result from the use of substitute parts.

Installation

1)Remove screws from one of the vent hole covers "A" (but not both) on top of the WarmHearth.

2)Take one way duct vent pipe and rotate in hole to cut through 4 in. of insulation. Remove insulation from pipe.

3)Remove screws on cover "B" and slide it to the back.

4)Install the one way valve making sure it is pushed all the way down. Shutters should

Central Heat Option

Regency Z2510 WarmHearth

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents WarmHearth Fireplace Regency Fireplace Product Table of Contents Safety Label for Z2510L Safety LabelOptions InstallationRegency Warmhearth Product DetailsImportant Please read and follow these rules for safety Dimensions and SpecificationsClearances Height Requirements Fireplace Enclosure FramingBuilding Structures Cannot Encroach on Chase Location FireplaceHearth Extension No stand-offs are requiredCanada Chimney System ConsiderationsChimney Height Chase EnclosureInstalling STAND-OFFS Installation ComponentsBefore YOU Start SET Warmhearth Into Position Installing the Chimney SystemOffset Chimney Installation Model 1st Floor 2nd Floor into AtticDo not use water, it will create a steam explosion Internal Blower with Thermo-Disc InstallingInstalling the Blower Systems Outside AIR KITInternal and External Blowers With a Thermodisc Parts List QtyGravity AIR Feed KIT Option External Blower with Thermo-DiscInstalling Your Central Heating System InstallationMaterials Required Typical Floor Register Masonry Retainer Kit Option Non-Self Supporting, Thin Veneer Facades InstallationFinishing Warmhearth Completing the FacingFinishing Details Completing the MantleExample Face of Fireplace Flush with Wall Sheathing Masonry Liner Bricks Latch AdjustmentGlass Installation Secondary AIR Tube InstallationMaintenance Safety GuidelinesMaintenance Parts List Parts LIST- Firebox & BodyDescription Parts List BAFFLES, DOOR, Options Warranty Lifetime WarrantyInstaller Please complete the following information

Z2510L specifications

The Regency Z2510L is a standout device in the realm of advanced wireless communication. With its cutting-edge features and robust design, it’s specifically engineered to cater to the demands of both personal and professional use. This device is recognized for its reliable performance, making it a staple for users who require efficiency and versatility.

One of the key features of the Regency Z2510L is its exceptional connectivity options. Equipped with state-of-the-art wireless technology, the device supports multiple frequency bands, ensuring seamless communication across various platforms. This flexibility guarantees that users can stay connected, whether at home, in the office, or on the go.

The Z2510L also boasts an intuitive user interface that enhances the overall user experience. Its well-organized menu system allows users to navigate through various functions with ease, significantly minimizing learning curves. Whether it’s for initiating calls, sending messages, or accessing additional features, the interface is designed with user-friendliness in mind.

A noteworthy characteristic of the Regency Z2510L is its long-lasting battery life. The device is equipped with an energy-efficient battery that supports extended usage without frequent recharging. This aspect is particularly beneficial for professionals who are often on the move and cannot afford downtime. The battery performance is complemented by advanced power management technology, which optimizes usage and extends the overall lifespan of the device.

Durability is another hallmark of the Regency Z2510L. It's built to withstand various environmental conditions, making it a reliable choice for users in demanding situations. Whether exposed to dust, moisture, or extreme temperatures, the device maintains functionality and longevity.

Security features are paramount in today's digital age, and the Z2510L does not disappoint. It incorporates robust encryption protocols designed to safeguard communications. This focus on security ensures that sensitive information remains protected, offering peace of mind to users concerned about data breaches.

Moreover, the Regency Z2510L is equipped with advanced audio technology, providing crystal-clear sound quality during calls. Enhanced noise cancellation features ensure that conversations are uninterrupted and clear, even in busy settings.

In summary, the Regency Z2510L represents a blend of functionality, durability, and advanced technology. With its user-centric design, powerful connectivity, and a host of remarkable features, it serves as a reliable tool for anyone seeking efficient communication solutions. Whether for personal or professional use, the Z2510L is poised to meet the demands of today’s fast-paced world.
Top Page Image Contents