Regency U38-NG, U38-LP installation manual Conversion from Natual GAS to Propane, Burner Orifice

Page 9

INSTALLATION

CONVERSION FROM NATUAL GAS TO PROPANE

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER

IF IN DOUBT DO NOT DO THIS CONVERSION !!

Conversion Kit 730-969 Contains:

Qty. Part #

Description

1

910-018

SIT Conversion Kit-

 

 

50% Turndown LP

1

910-037

LP Injector (Pilot Orifice)

1

904-641

Burner Orifice #50

1

908-528

Red "PROPANE" label

1

908-255

Label "Converted to Propane"

1

918-032

Instruction Sheet

1)Shut off the gas supply.

2)Open the front door and carefully remove the logs and lava rock.

3)Remove burner. See diagram below.

7)Unscrew the pilot orifice with the allen key and replace with the LP pilot orifice in the kit.

8)Remove burner orifice with a 1/2" wrench and discard. Use a wrench to hold on to the elbow behind the orifice.

Note: Use a magnetic type screwdriver if pos- sible.

Pilot assembly is now accessible for

steps 4) to 9).

4)Remove and discard the 3 pressure regu- lator mounting screws (A), pressure reg- ulator tower (B) and diaphragm (C).

5)Insure that the rubber gasket (D) is properly positioned and install the new HI/LO pres- sure regulator assembly to the valve using the new screws (E) supplied with the kit. Tighten screws securely.

6)Pull off the pilot cap to expose the pilot orifice.

Burner Orifice

9)Reinstall new burner orifice LP stamped #50 and tighten.

10)Reverse steps 3) to 2).

11)Attach the Conversion label "This unit has been converted to Propane" on top of the Serial # decal.

12)Replace yellow "Natural Gas" label with red "Propane" label

13)Check for gas leaks.

14)Check inlet and outlet pressures.

15)Check operation of flame control.

16)Check for proper flame appearance and glow on logs.

Installer Notice:

These instructions must be left with the appliance.

Regency U38 ULTIMATE Freestanding Gas Heater

9

Image 9
Contents Ultimate U38 Freestanding Gas Stove To the New Owner U38-NG & U38-LPRegency U38 Ultimate Freestanding Gas Stove Table of Contents Copy of the Safety Label for the U38 Freestanding Gas Stove Safety LabelGeneral Safety Information InstallationInstallation Checklist Before YOU StartU38-NG & U38-LP Reference Dimensions Optional Outside AIRClearances to Combustibles High Elevation Draft HoodGAS Pipe Pressure Testing GAS ConnectionHigh Elevation U38-NG Pilot assembly is now accessible for Steps 4 to Conversion from Natual GAS to PropaneBurner Orifice Conversion to Lower BTU Rating for U38 LOG SET InstallationNatural Gas Conversion Kit 730-920 Contains Propane Conversion Kit 730-922 ContainsPinCutout Pins on Rear Log SupportNotch Lava rockLouver Installation Front Door InstallationTest for Flue Spillage Optional Wall ThermostatWiring Optional Remote ControlThermostat Wire Table Final CheckOperating Instructions Copy of the Lighting Plate Instructions Pilot Adjustment Aeration AdjustmentNormal Operating Sounds GAS Appliances Maintenance FAN Maintenance Installing GlassPanel Door Magnetic type screwdriver Removing ValveParts List U38 Main AssemblyDescription U38 Burner & LOG Assembly U38 Door Assemblies Conditions WarrantyInstaller Please complete the following information

U38-NG, U38-LP specifications

The Regency U38-LP and U38-NG are innovative gas fireplaces designed to deliver both warmth and elegance to any living space. These units exemplify modern craftsmanship while ensuring high efficiency, making them popular choices among homeowners looking to enhance their indoor ambiance.

One of the key features of the Regency U38 series is its versatile design. Both models can be easily installed in a variety of settings, including new constructions and retrofits. Their clean, contemporary lines and large viewing area provide a stunning focal point for any room, allowing for maximum enjoyment of the flames. The U38-LP operates on liquid propane, while the U38-NG uses natural gas, catering to different fuel preferences and availability.

Efficiency is a hallmark of the Regency U38 series. With an impressive thermal efficiency rating, both models ensure minimal heat loss while maximizing warmth output. This efficiency not only translates into cost savings on energy bills but also contributes to a more environmentally friendly home. The switchable electronic ignition system enhances their user-friendliness, providing instant warmth with the push of a button.

The construction of the U38 fireplaces is another standout feature. They are built using high-quality materials, including a robust steel body and premium glass, ensuring durability and performance over time. Among the optional features available are customizable media options, such as glass crystals or decorative logs, allowing homeowners to personalize their fireplace to suit their tastes.

Advanced technology sets the Regency U38 series apart from traditional fireplaces. The units come equipped with an integrated, thermostatic remote control that allows users to adjust the temperature effortlessly. Additionally, the advanced airflow system ensures even heat distribution throughout the room, while the fan assist option can further enhance heat circulation.

Safety features are paramount in the design of the U38 fireplaces. They include a built-in safety shutdown system that activates if any anomalies are detected, providing peace of mind for users.

In summary, the Regency U38-LP and U38-NG fireplaces offer an ideal combination of style, efficiency, and advanced technology. Their attractive design, customizable options, energy-saving performance, and comprehensive safety features make them an excellent choice for modern homes looking for effective heating solutions without compromising on aesthetics.