Lucent Technologies Release 4.0 manual Cable Connections, Table B-2. Air Purity Requirements

Page 47

DEFINITY AUDIX System Release 4.0

System Description Pocket Reference 585-300-214

Customer Responsibilities

Cable Connections

Table B-2. Air Purity Requirements

Contaminant	Average concentration

Total particulate matter, including the following:	185.00 microgram/m3
Dust
Lint
Carbon particles
Paper fiber
Metal fragments

Nitrate in particulate matter	12.00 microgram/m3
Corrosive gases
Total hydrocarbons equivalent to methane	10.00 ppm
Sulphur dioxide	0.20 ppm
Oxides of nitrogen	0.30 ppm
Total oxidants equivalent to ozone	0.05 ppm
Hydrogen sulfide	0.10 ppm

Cable Connections

The customer is responsible for providing several connections from the customer’s facilities to the DEFINITY AUDIX system. These connections divide maintenance responsibilities between Lucent Technologies and the customer:

■All customers must provide a Cmentral Office (CO) line or a Direct

Inward Dialing (DID) line to connect the modem to an external telephone network for remote maintenance.1

■All customers must provide a power source for the external modem.1

■Customers using INTUITY Message Manager must provide a 10BaseT to connect the DEFINITY AUDIX system to the customer’s local area network (LAN).

Figure B-1 shows the connections customers must provide for the external modem.

Issue 1 May 1999

B-3

1.Customers outside the U.S. must provide an external modem.

Image 47

Contents Definity Audix System Release Lucent Technologies Web Ordering Information Contents Customer Responsibilities Page Special Terminology About this BookIntended Audiences Supported Product ReleasesViii How to Order Additional DocumentationHow to Comment on This Book TrademarksFeature Overview Features and CompatibilityFeature Overview Features for the Customer OrganizationSavings from a Smaller System Features for the SubscriberIssue Features and Compatibility Feature OverviewAdvantages of Intuity Message Manager Features for the System AdministratorCompatibility SwitchesFeatures and Compatibility Non-native mode.5 Native and Non-native ModeCompatibility Considerations for the Defintiy Audix systemDefinity Audix System Release Switch Releases Compatible with the Definity Audix System Definity Audix System Release Definity Audix System Design and OperationFlashware TN568 Circuit PackHard Disk Drive Port Board EmulationDigital Networking SoftwareNetworking Amis Analog NetworkingHigh-speed Digital Networking Connections Maximum Voice Ports and Digital Networking PortsCydxsl15 LJK DCP Mode 2 Connection Design and Operation MO Disk Drive MO Disk DriveDesign and Operation Faceplate FaceplateSpace Requirements On-board CablesOperating Requirements Sample Location in a SCC Design and Operation Operating RequirementsSample Location in a CMC Environmental Requirements Power RequirementsPhysical Dimensions for the Definity Audix System Power Requirements for the Definity Audix SystemAir Purity Requirements Atmospheric RequirementsDefinity Audix System Release Average System Requirements per Subscriber Capacity and SizingVoice Ports Voice PortsPort Capacities in Erlangs Capacity and Sizing Voice PortsBroadcast Messaging Features that Affect Voice PortsOutcalling Automated AttendantCapacity and Sizing Voice Storage Voice StorageVoice Storage for Announcement Sets Hard disk drive to store voice mail and announcements Intuity Message ManagerCapacity and Sizing Intuity Message Manager Limits for Intuity Message Manager Backup Limits on the MO Disk DriveBackup Limits on the MO Disk System Design Appendix a Transition NotesSystem Design Native and Non-native SupportVoice Ports Administration ImpactsDigital Networking Port Migration ImpactsExternal Modem Alarm OriginationAdministration Impacts MO Disk Drive Alarm RelayLEDs Analog Port Emulation Switch IntegrationSwitch Integration DCS NetworkingLimited Availability for Control Link Integration Transition Notes Switch Integration Staff Appendix B Customer ResponsibilitiesStaff Environmental RequirementsTable B-1. Atmospheric Requirements Environmental RequirementsTable B-2. Air Purity Requirements Cable ConnectionsCable Connections Figure B-1. Cable Connections for the External Modem Customer Responsibilities Cable ConnectionsFigure B-2. Lucent- and Customer-provided LAN Connections Definity Audix System Release AB-1 AbbreviationsAB-2 AB-3 KbpsKHz AB-4 MHzAB-5 TTYAbbreviations AB-6 Glossary Boot or Reboot Audio Messaging Interchange Specification AmisAudix Administration and Data Acquisition Package Adap BackupBroadcast Messaging Boot FilesystemBusyout Service Class of Service COSDelivery Operations Support System Doss Configurator Command ModeConfiguration Control Link ModeErrors Digital-Port DP ModeDigital Signal Processor DSP Disconnect Signaling DetectionFlash programmable read-only memory Fprom Guest PasswordField FilesystemsInitialization Initialization and Administration System InadsHeader Hunt GroupMagneto-optical MO Disk Drive Local Maintenance Terminal LMTLogin Local Area Network LANOperations, Administration, and Maintenance OA&M Native ModeNon-native Mode Nonvolatile Random Access Memory NvramReply Loop Escape RebootRemote Field Update ProtocolSubscriber Specific Announcement Set UpdateUpgrade Standalone UtilityGL-12 Voice PortIN-1 IndexIN-2 IN-3 13, B-1 to B-3 power, 2-12 space, 2-9 toIndex IN-4