DEFINITY AUDIX System Release 4.0
System Description Pocket Reference
Glossary
Digital-Port (DP) Mode
The type of
Digital-Port (DP) Board Emulation
In R3.1 and earlier releases, this term referred to both the port emula- tion and to the integration method. In R3.2 and later, it refers to the port emulation only; the integration method can be either control link (CL) or display set (DS).
Digital Signal Processor (DSP)
Programmed RAM chips on the Multifunction board that provide signal- ing,
Display Set (DS) Integration
A new term that replaces the term digital port integration for R3.2 and later. It refers to the use of the display and other messages sent from the switch to the port board for providing voice mail integration with the switch. Integration with the switch is achieved via display set mes- sages. The messages carry information such as calling party identifica- tion and message waiting indicator status and control.
Disconnect Signaling Detection
Signaling from the CO to the PBX which indicates that the far end caller has hung up.
Dual Language Greetings
When the Call Answer Language Choice is in effect, the subscriber can record personalized greetings for each of the languages listed as the primary and secondary announcement sets. The subscriber instructs the caller to enter *1 to switch to the alternate language.
E
Errors
Problems detected by the system during automatic
Events
Occurrences such as inline errors, maintenance procedure failures, alarms, errors, or transitions into or out of the AUDIX or OA&M states which are recorded in an events log.
F
Faceplate and Alarm Controller (FAC)
Issue 1 May 1999
GL-5
For release 3.2 and earlier versions, the circuitry on the Multifunction board that monitors activity of the DEFINITY AUDIX System.