Lucent Technologies Release 4.0 Command Mode, Configuration, Control Link CL, Control Link Mode

Page 60

DEFINITY AUDIX System Release 4.0

System Description Pocket Reference 585-300-214

Glossary

Command Mode

A system state in DEFINITY AUDIX system releases earlier than 4.0 where flashware is in control and software is shut down. In this state, a technician has access to menu options to see flashware status and ini- tialization history, run through flashware diagnostics, and to start or continue system initialization.

Configuration

The particular composition and hardware selected for a system, includ- ing internal options and peripheral equipment.

Control Link (CL)

The integration, or interface, between the DEFINITY AUDIX System and the switch that enables the transmission of control messages from the DEFINITY AUDIX System to the switch over a DCIU data link. The control messages are transmitted over a separate cable connection and carry information such as calling-party identification and mes- sage-waiting indicator status and control.

Control Link Mode

The type of switch-link integration for which the DEFINITY AUDIX Sys- tem, R2.0 or later, is connected to the switch via analog-line card emu- lation and a digital connection.

D

Delivery Operations Support System (DOSS) Configurator

Lucent Technologies’ algorithmic system for configuring products for customers’ specific needs.

Digital Communications Protocol (DCP)

An Lucent Technologies proprietary protocol for networking remote communication systems.

DCP Mode 1

A Lucent Technologies proprietary Digital Communications Protocol (DCP) connection using a data rate of 56 Kbps for AUDIX Digital Net- working. DCP Mode 1 uses a DS1 facility on the switch or a dedicated facility on the switch or a dedicated facility on a T1 carrier.

DCP Mode 2

DCP Mode 2 is an asynchronous, low-speed (9600 or 19,200 bps) connection for AUDIX Digital Networking. DCP Mode 2 uses a modem/data module or modem/Asynchronous Data Unit (ADU) arrangement and connects over analog or voice-grade data lines.

DCP Mode 3

A DCP connection using a data rate of 64 Kbps for AUDIX Digital Net- working. DCP Mode 3 uses a DS1 or ISDN facility on the switch or a dedicated facility on a T1 carrier.

Default

Issue 1 May 1999

GL-4

A value that is automatically supplied if no other value is specified.

Image 60

Contents Definity Audix System Release Lucent Technologies Web Ordering Information Contents Customer Responsibilities Page About this Book Intended AudiencesSupported Product Releases Special TerminologyHow to Order Additional Documentation How to Comment on This BookTrademarks ViiiFeatures and Compatibility Feature OverviewFeatures for the Customer Organization Feature OverviewFeatures for the Subscriber IssueFeatures and Compatibility Feature Overview Savings from a Smaller SystemFeatures for the System Administrator Advantages of Intuity Message ManagerSwitches Features and CompatibilityCompatibility Native and Non-native Mode CompatibilityConsiderations for the Defintiy Audix system Non-native mode.5Definity Audix System Release Switch Releases Compatible with the Definity Audix System Definity Audix System Release Design and Operation Definity Audix SystemTN568 Circuit Pack Hard Disk DrivePort Board Emulation FlashwareSoftware NetworkingAmis Analog Networking Digital NetworkingMaximum Voice Ports and Digital Networking Ports High-speed Digital Networking ConnectionsCydxsl15 LJK DCP Mode 2 Connection MO Disk Drive Design and Operation MO Disk DriveFaceplate Design and Operation FaceplateOn-board Cables Operating RequirementsSpace Requirements Design and Operation Operating Requirements Sample Location in a SCCSample Location in a CMC Power Requirements Physical Dimensions for the Definity Audix SystemPower Requirements for the Definity Audix System Environmental RequirementsAtmospheric Requirements Air Purity RequirementsDefinity Audix System Release Capacity and Sizing Voice PortsVoice Ports Average System Requirements per SubscriberCapacity and Sizing Voice Ports Port Capacities in ErlangsFeatures that Affect Voice Ports OutcallingAutomated Attendant Broadcast MessagingVoice Storage Voice Storage for Announcement SetsCapacity and Sizing Voice Storage Intuity Message Manager Capacity and Sizing Intuity Message ManagerHard disk drive to store voice mail and announcements Backup Limits on the MO Disk Drive Backup Limits on the MO DiskLimits for Intuity Message Manager Appendix a Transition Notes System DesignNative and Non-native Support System DesignAdministration Impacts Voice PortsMigration Impacts Digital Networking PortAlarm Origination Administration ImpactsExternal Modem Alarm Relay LEDsMO Disk Drive Switch Integration Switch IntegrationDCS Networking Analog Port EmulationLimited Availability for Control Link Integration Transition Notes Switch Integration Appendix B Customer Responsibilities StaffEnvironmental Requirements StaffEnvironmental Requirements Table B-1. Atmospheric RequirementsCable Connections Cable ConnectionsTable B-2. Air Purity Requirements Customer Responsibilities Cable Connections Figure B-1. Cable Connections for the External ModemFigure B-2. Lucent- and Customer-provided LAN Connections Definity Audix System Release Abbreviations AB-1AB-2 Kbps KHzAB-3 MHz AB-4TTY AB-5Abbreviations AB-6 Glossary Audio Messaging Interchange Specification Amis Audix Administration and Data Acquisition Package AdapBackup Boot or RebootBoot Filesystem Busyout ServiceClass of Service COS Broadcast MessagingCommand Mode ConfigurationControl Link Mode Delivery Operations Support System Doss ConfiguratorDigital-Port DP Mode Digital Signal Processor DSPDisconnect Signaling Detection ErrorsGuest Password FieldFilesystems Flash programmable read-only memory FpromInitialization and Administration System Inads HeaderHunt Group InitializationLocal Maintenance Terminal LMT LoginLocal Area Network LAN Magneto-optical MO Disk DriveNative Mode Non-native ModeNonvolatile Random Access Memory Nvram Operations, Administration, and Maintenance OA&MReboot Remote Field UpdateProtocol Reply Loop EscapeUpdate UpgradeStandalone Utility Subscriber Specific Announcement SetVoice Port GL-12Index IN-1IN-2 13, B-1 to B-3 power, 2-12 space, 2-9 to IN-3Index IN-4