Regency P48-2 installation manual LOG SET Installation, 02-88

Page 31

INSTALLATION

LOG SET INSTALLATION

Read the instructions below carefully and refer to the dia- grams. If logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot opera- tion.

The gas log kit (Part # 370-930) contains the following pieces:

a)02-83 Center Cross Log

b)02-84 Right Side Cross Log

c)02-85 Front Left Side Log

d)02-86 Front Right Side Log

e)02-87 Left Side End Log

f) 02-88

Rear Log

g)02-89 Middle Right Side Log

h)02-90 Right Side End Log

i)902-154 Embers (Lava)

j)902-179 Vermiculite

k)946-669 Platinum Embers (supplied with packaged manual)

If you will be installing the optional brick panels, install them prior to installing the logs.

02-88

4)Place Log 02-85 on the front left side of the burner. Position the right end of the log into the pin on the burner and rest the left end of the log between the 1st grate post and the front tab.

02-8802-90

02-87

02-89

 

 

02-86

02-85

02-84

 

02-83

The "02" reference numbers (i.e. 02-83) are molded into the rear of each log.

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Sprinkle the vermiculite all over the top of the base brick panel.

3)Line up the two holes on the underside of Log 02-88 with the 2 pins at the rear of the grate and position into place.

02-88

02-85

1st Grate Post

Tab

Pin

 

5)Line up the two holes on the underside of Log 02-86 with the 2 pins on the right side of the burner and posi- tion into place.

02-88

02-86

02-85

Pins

Pins

Regency® P48-2 Zero Clearance Direct Vent Gas Fireplace

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents P48-2 Gas Fireplace Manufactured Mobile Home Requirements Table of Contents Copy of Safety Decal Safety LabelMA Code CO Detector RequirementsImportant Message Save These Instructions InstallationGeneral Safety Information Installation ChecklistOptional Heat Release KIT Manufactured Mobile Home Additional RequirementsLocating Your GAS Fireplace Heatwave Optional Duct System KITClearances Mantel LEG Clearances MantelsSimpson Dura-Vent terminations Framing & FinishingIntroduction Unit AssemblyInstallation VentingExterior Vent Termination Requirements Horizontal Termination Venting ArrangementsSimpson DURA-VENT Venting Components List Simpson DURA-VENT VentingDescription 58DVA-16AB 8 Rigid Pipe Cross Reference ChartL676 & L900 Direct Vent Fireplace Propane & Natural Gas Horizontal Venting with Two 2 90o Elbows Vertical Venting with Two 2 90 o Elbows Vertical Venting with Three 3 90o Elbows Simpson DURA-VENT Direct Vent GS System Maximum two 45o elbows allowed 36-5/8 930mm high frame opening Unit Installation with Horizontal TerminationFeet Unit Installation With Vertical TerminationDiagram Minimum VentWith Regency Direct Vent System Flex Unit InstallationHigh Elevation GAS Line InstallationPilot Adjustment GAS Pipe Pressure TestingLPG Conversion Kit Contains Qty Conversion KIT from NG to LPGInstallation of the DC Sparker Ground Wire from Kit Bottom Clips Brick Panels Installation02-88 LOG SET Installation02-88 02-83 02-85 02-90 02-87 Flush Louvers Standard Flush DoorOptional Flush Trim Optional BAY Trim Optional BAY DoorBAY Louvers Double Screen Door Optional Finishing TrimBut not both Can be used with Option 1 or 2 but not both Optional Remote Control Wall Switch Wall ThermostatDo not cut the ground terminal off under any circumstances Wiring DiagramsFor Propane Units and Units Equipped with DC Spark Boxes Secure left side with 2 screws Diagram Installing the Optional FANOperating Instructions Normal Operating Sounds GAS Appliances Maintenance Door Glass Installing ValveShut off the gas supply Removing ValveMain Assembly Parts List102 100 Burner & LOG Assembly Flush Door & Louvers BAY Front & Louvers Conditions WarrantyInstaller Please complete the following information

P48-2 specifications

The Regency P48-2 is an advanced handheld radio transceiver that has gained recognition among amateur radio enthusiasts for its remarkable features, performance, and cutting-edge technology. This compact device offers a perfect combination of versatility and ease of use, making it suitable for both beginners and experienced operators.

One of the standout characteristics of the P48-2 is its robust communication capabilities. Operating in the VHF and UHF frequency ranges, this transceiver can effortlessly handle a variety of communication modes including FM, SSB, and CW. This versatility allows users to engage in a wide range of activities, from casual chatting to serious emergency communications.

The P48-2 is equipped with a powerful microprocessor that facilitates efficient signal processing, resulting in clearer audio and reduced interference. This advanced technology enhances the user experience significantly, particularly in crowded bands. Additionally, the built-in Automatic Frequency Control (AFC) helps maintain frequency stability, especially important when operating in dynamic environments.

Another notable feature of the P48-2 is its ergonomic design. Weighing less than many competitors in its class, it boasts a lightweight yet durable construction. Its intuitive interface, complete with a large LCD screen, makes navigation seamless. Users can easily adjust settings, frequency selections, and access various functions without any hassle, even during field operations.

Battery life is also impressive, with the P48-2 designed to handle long operational hours without the need for frequent recharging. This is particularly beneficial for outdoor enthusiasts and those who require reliable communication during extended trips. The device is compatible with a range of rechargeable batteries, providing flexibility for users to choose their preferred power source.

In addition to its core functionalities, the Regency P48-2 comes with a range of accessories that enhance its overall usability. Optional external microphones, headsets, and antenna models can be integrated to optimize communication quality. This adaptability ensures that users can customize their experience to suit specific needs.

Finally, the P48-2 is backed by robust customer support and a thriving community of users. This network of fellow operators often shares tips, modifications, and troubleshooting advice, creating a collaborative environment for newcomers and experts alike.

In summary, the Regency P48-2 is a highly capable transceiver that offers exceptional performance, user-friendly design, and versatile communication options. Its advanced technologies and robust features make it a standout choice for anyone looking to explore the world of amateur radio. Whether for casual use or emergency situations, the Regency P48-2 proves to be a reliable companion.
Top Page Image Contents