26 | Maintaining Your Appliance |
Baffle Removal & Replacement
1Lift up on the front portion of the front three firebricks.
2Lift the front baffle support “Y” and rotate it forward until it can be removed.
3Slide the center front firebrick forward and out the door opening. Then slide the side front firebricks towards the middle then out in the same manner.
4Slide the center baffle support forward and out of the firebox.
5Slide the rear firebrick forward and out of the firebox. NOTE: When the center rear firebrick are slid forward the damper plate will come to rest on the rear secondary air tube and rear air channel.
6Slide the damper slider all the way forward.
7Reach into the firebox and push up on the damper yoke until the damper yoke separates from the damper slider. Remove both the damper slider and damper plate by sliding them between the front two secondary air tubes.
REPLACEMENT INSTRUCTIONS:
1Place the damper plate above the secondary air tubes in the rear center of the firebox.
2Position the damper slider so the damper yoke inserts into the two tubes on the damper slider (make sure to have correct orientation). Then slide the damper slider over the damper plate until both are centered in the firebox.
3Follow the instructions above in reverse order, starting with step number 5.
Air Tube Removal & Replacement
Air Tube Collar |
|
Air Tube | Remove the left pin on the air tube collar |
a |
Roll Pin
b Slide the air tube to the left, swing it down and remove from the firebox.
© Travis Industries | 4041105 |