Listing Label

28	Listing Label

DO NOT REMOVE THIS LABEL

Listed Solid Fuel Burning Appliance

Suitable for use in masonry fireplaces.

MODEL: FREEDOM (FLEX)

SERIAL

Tested to: UL-1482/UL-907 NUMBER

Report No. 6009 (March 1990)

PREVENT HOUSE FIRES - Install and use only in accordance with the manufacturer's installation and operating instructions. Contact your local building or fire officials about restrictions and installation inspection in your area. Refer to local building codes and manufacturer's instructions for precautions required for passing a chimney through a combustible wall or ceiling. Do not run a chimney connector through a combustible wall or ceiling. Do not connect this unit to a chimney flue serving another appliance. Clearances may be reduced by methods specified in NFPA 211, listed wall shields, pipe shields, or other means approved by local building or fire officials.

Minimum Clearances

to Combustible Materials Fireplace Insert Installation

Freedom

K.	Mantle	32.0 in.
	with Mantle Shield	19.0 in.
L.	Top Facing	30.0 in.
	with Shield	17.0 in.
M. Adjacent Sidewall		15.0 in.
N. Side Facing		13.5 in.

ALL

SIDEW

Insert Clearance Diagram

MANTEL
K	L		OR TRIM
	L		FACIA
M		N	FACIA
INSERT

8 16

HEARTH EXTENSION

Front 16.0 in.

Sides 08.0 in.

COMPONENTS REQUIRED FOR MASONRY FIREPLACE INSTALLATION: Surround Panels.

Direct flue connection is optional. Do not remove bricks or mortar from masonry fireplace.

Note: Replace glass with 5mm neoceramic or ceramic glass only.

For use with solid wood fuels only. Operate only with feed door closed - open to feed fire only. Do not use a grate or elevate fire - build fire directly on the hearth.

Manufactured By:

4800 Harbour Pointe Blvd. SW Mukilteo, W

U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with July 1990 particulate emission standards.

Date of Manufacture

2004 2005 2006 Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec.

DO NOT REMOVE THIS LABEL	Made in U.S.A.	0225 (IGN)
		0225 (IGN)

100-01162

4041105