Lopi Answer Wood Stove Insert Installation for qualified installers only, Insert with, Positive

Insert Installation (for qualified installers only)		21
Insert with	Install a non-combustible	Cap (prevents water
	cover plate to prevent water
Positive		from entering)
	from entering the chimney
Connection

		NOTE: This installation may be
		used with a masonry or zero	Flue Liner
N O T E :		clearance fireplace. The
		requirements in the section	The liner must be
Most factory-built
		"Masonry Fireplace Requirements"	stainless steel
chimney		or "Zero Clearance Fireplaace	connector or flexible
manufacturers		Requirements" must be fulfilled	vent. Follow the liner
make stainless		prior to installation.	manufacturer's
steel chimney			insturctions for
liners, either			installation and
flexible or rigid.			support.
This provides a		Combustible Mantle
wide variety of			Airtight Insulated
installation			Clean-Out
options. Make
sure to follow the		Surround Panels	Remove damper
manufacturer's
instructions for			or wire it open
installation and		See the section "Insert
support
		Placement Requirements" for
		minimum clearances and
		hearth required.
Insert	with	NOTE: This installation may be
		used with a masonry or zero
Direct		clearance fireplace. This
		illustration depicts a masonry
Connection		insert, all requirements in the	Flue
		section "Masonry Fireplace
(Masonry		Requirements" must be fulfilled	Liner
Fireplace)		prior to installation.	Stainless steel
			chimney connector
			must Extend 1' past
			the block-off plate or
N O T E :			to the flue liner
Direct		Combustible Mantle
connections			Airtight
require installation			Insulated
			Clean-Out
of an airtight
block-off plate or
damper adapter			Remove
(see "Block-off		Surround Panels	damper
Plate Installation"			or wire it
			open
on page 20).
		See the section
		"Insert Placement
		Requirements" for	Block-off plate or
		minimum clearances
		and hearth required.	damper adapter
Travis Industries		93508131	4 020327