Insert Installation (for qualified installers only) | 17 |
SAFETY NOTICE:
Please read this entire manual before you install and use your new room heater. Failure to follow instructions may result in property damage, bodily injury, or even death. Contact local building or fire officials about restrictions and installation inspection requirements in your area.
Planning The Installation
We suggest that you have an authorized Travis Industries dealer install your stove. If you install the stove yourself, your authorized dealer should review your plans for installation.
Check with local building officials for any permits required for installation of this stove and notify your insurance company before proceeding with installation.
Preparation for Installation
•Check for damage to the exterior of the inserts (dents should be reported, scratches can be fixed by applying touch up paint).
•Check the interior of the firebox (replace cracked firebrick and make sure baffle is in place).
The stove can be lightened by removing the firebricks and baffle. (pg 26) - replace before operation.
Insert Installation Considerations
•This insert is approved for installation into an existing masonry or zero clearance (metal) fireplace. Depending upon your installation concerns, several options are yours to provide the most desirable installation. The sections that follow detail the requirements that must be met for a safe installation.
To further help installation, the most common types of installations are explained in table below. Prior to installing your insert make a detailed plan with dimensions to
Installation Type | Considerations | |
Insert with Positive Flue (Full Reline) | • Utilizes existing masonry or zero clearance fireplace | |
(Page 21) | • Provides best draft | |
| • Easiest to clean | |
Insert with Direct Connect Flue | • Utilizes existing masonry or zero clearance fireplace | |
(Page 21 and 22) | • Provides good draft | |
| • Requires fireplace | |
Insert with Face Seal Connection | • Utilizes existing masonry fireplaces with cross section | |
(Page 22) | of 28" to 144" (not approved for zero | |
clearance fireplaces) | ||
| ||
| • Provides okay draft | |
| • Easiest to install | |
| • Requires the optional surround panels and insulation | |
| (see "Surround Panels" on page 41). |
Surround Panels
•The insert must be installed with surround panels (see page 41).
Travis Industries | 93508131 | 4 020327 |