Chain

INSTALLATION

29)Locate the ground lug at the receptical box, left of the unit.

30)Connect one end of the supplied green ground wire to the lug with the nut and washer from the kit.

33)Plug the DC spark generator wires to the DC Sparker.

34)Connect the ground wire to the DC Sparker mounting bracket.

37b) Recommended location to mount the DC Sparker.

Ground

wire from

kit

31)Install the 1/2" bushing to the heat shield.

35)Install the supplied battery into the DC Sparker Box by opening the battery compartment.

NOTE: The battery in the DC Sparker Box will need to be replaced annually.

37c) Note: Remove the bottom louver by unscrewing the four screws located on the hinges.

Battery

Compartment

32) Run the other end of the ground wire	36) Mount the heat shield to the DC Sparker.
32) Run the other end of the ground wire	Secure into place with the velcro, which
and DC spark generator wires through	is provided in the kit.
the bushing on the heat shield.
Heat Shield

37a) Find a location which is not too hot and is easy to reach for changing the battery. Note: It should be kept away from the chain.

38)Tie up the loose wire with the wire clip.

39)Check for gas leaks.

40)Check inlet and outlet pressures.

41)Check operation of ﬂ ame control.

42)Check for proper ﬂ ame appearance and glow on logs.

Installer Notice:

These instructions must be left with the appliance.

Regency® E21-2 Gas Fireplace Insert

E21-NG2, E21-LP2 specifications

The Regency E21-LP2 and E21-NG2 are modern gas fireplaces that embody style, efficiency, and advanced engineering, making them standout choices for homeowners seeking both aesthetic appeal and functional utility. These models are designed to complement a wide variety of interior decor styles while providing warmth and comfort.

One of the most prominent features of the E21 series is its high-efficiency heating capability, which allows these fireplaces to generate a significant amount of heat while using minimal fuel. The E21-LP2, designed for liquid propane, and the E21-NG2, designed for natural gas, ensure versatile installation options for different home setups. Homeowners can select the fuel type that best suits their needs or local availability.

The design of the Regency E21 models is marked by a large viewing area, providing an unobstructed view of the mesmerizing flames. The impressive flame pattern not only adds to the ambiance but also creates a warm and inviting focal point in any living space. The elegant, clean lines and contemporary frame enhance the fireplace's visual appeal, making it an excellent choice for modern interiors.

In terms of technology, both models are equipped with the advanced IntelliFire ignition system, which offers reliability and ease of use. This system ensures that igniting the fireplace is straightforward and safe, freeing homeowners from the hassles of traditional methods. Furthermore, the built-in programmable thermostat allows for precise temperature control, ensuring optimal comfort levels with minimal environmental impact.

Moreover, the Regency E21 series is constructed with high-quality materials designed to offer durability and longevity. The fireplaces come with a variety of finish options, allowing homeowners to personalize their units to match their specific tastes and styles. The E21 models also feature a convenient glass safety barrier, which enhances safety while maintaining the fireplace's aesthetic appeal.

With an emphasis on energy efficiency and environmental responsibility, the E21-LP2 and E21-NG2 are not only stylish additions to any home but also economically favorable choices for homeowners. By combining practical features with contemporary design, Regency has created fireplaces that cater to modern living while providing comfort and elegance. Whether for new installations or upgrades to existing spaces, these models are sure to impress.