Door Glass Replacement, Removing Valve Assembly

MAINTENANCE

DOOR GLASS

REPLACEMENT

Your Regency® stove is supplied with high temperature,5mmNeoceramceramicglassthat will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replacement from an authorized Regency® dealer only, and follow our step-by-step instructions for replacement.

Bay Glass Removal

1)Remove the door from the unit and place on a soft surface to prevent scratching.

2)Remove the nuts holding the glass retainers in place.

3)Remove the glass retainers (sides, top and bottom).

4)Replace the glass. The glass must have gasketing around it.

5)Reverse the previous steps, replace the retainers and fasten with the nuts but do not over tighten, as this can break the glass.

6)Replace door on the stove and check the seal.

REMOVING VALVE

ASSEMBLY

1)Disconnect the power.

2)Shut off the gas.

3)Remove top and bottom louvers.

4)Remove top and bottom trim.

5)Remove glass.

6)Remove log set & embers, and brick panels.

7)Disconnect the gas line.

8)Remove wires from valve (top and bottom terminals).

9)Remove the burner tray by removing the 1 screw on each side, then slide the tray to the left and lift out.

12)Remove the 2 screws on each side of the ﬁ rebox bottom and 4 screws on the rear wall., and lift out.

13)Remove valve assembly from stove body by removing 3 phillips screws.

14)Remove the valve from the bracket and replace. Reverse steps to install valve.

Flush Glass Replacement

Replace with new ﬂ ush front per instructions in the "Flush Glass" section.

Remove 2 screws, then push burner tray to

left and lift out.

10)Remove the 2 screws to the right of the cutout on the ﬁ rebox bottom.

11)Remove the switch cover from the left side of the body base and pull the thermodisc out of the bracket under the left side of the ﬁ rebox bottom.

REMOVING THE FAN

IMPORTANT

Disconnect power supply

before servicing

1)Disconnect the power.

2)Shut off the gas.

3)Remove top and bottom louvers.

4)Remove top and bottom trim.

5)Remove glass.

6)Remove logs, embers, and brick panels.

7)Remove Burner Tray and Firebox bottom - see steps 9) to 12) in "Removing Valve Assembly.

8)Remove wires from fan.

9)Lift fan off of the two pins.

10)Reverse steps to install fan.

Remove the 2 nuts holding the switch box in place, then pull the thermosdisc out of the bracket.

26	Regency® E21-2 Gas Fireplace Insert

E21-NG2, E21-LP2 specifications

The Regency E21-LP2 and E21-NG2 are modern gas fireplaces that embody style, efficiency, and advanced engineering, making them standout choices for homeowners seeking both aesthetic appeal and functional utility. These models are designed to complement a wide variety of interior decor styles while providing warmth and comfort.

One of the most prominent features of the E21 series is its high-efficiency heating capability, which allows these fireplaces to generate a significant amount of heat while using minimal fuel. The E21-LP2, designed for liquid propane, and the E21-NG2, designed for natural gas, ensure versatile installation options for different home setups. Homeowners can select the fuel type that best suits their needs or local availability.

The design of the Regency E21 models is marked by a large viewing area, providing an unobstructed view of the mesmerizing flames. The impressive flame pattern not only adds to the ambiance but also creates a warm and inviting focal point in any living space. The elegant, clean lines and contemporary frame enhance the fireplace's visual appeal, making it an excellent choice for modern interiors.

In terms of technology, both models are equipped with the advanced IntelliFire ignition system, which offers reliability and ease of use. This system ensures that igniting the fireplace is straightforward and safe, freeing homeowners from the hassles of traditional methods. Furthermore, the built-in programmable thermostat allows for precise temperature control, ensuring optimal comfort levels with minimal environmental impact.

Moreover, the Regency E21 series is constructed with high-quality materials designed to offer durability and longevity. The fireplaces come with a variety of finish options, allowing homeowners to personalize their units to match their specific tastes and styles. The E21 models also feature a convenient glass safety barrier, which enhances safety while maintaining the fireplace's aesthetic appeal.

With an emphasis on energy efficiency and environmental responsibility, the E21-LP2 and E21-NG2 are not only stylish additions to any home but also economically favorable choices for homeowners. By combining practical features with contemporary design, Regency has created fireplaces that cater to modern living while providing comfort and elegance. Whether for new installations or upgrades to existing spaces, these models are sure to impress.