Northern Industrial Tools 157494 Moving and Handling Instructions, Long Term Storage

Page 16

Moving and Handling Instructions

I.) Maneuvering Your Water Heater

1.Lift handles with both hands until the wheels come in contact with the ground and the frame is lifted off of the ground.

2.Push the water heater forward if it is being moved on solid, smooth ground. (concrete, hard-packed dirt)

3.Pull the water heater backward if it is being moved on rough, uneven ground. (grass, gravel)

Front Lifting Points

II.) Lifting Your Water Heater

1.To reduce risk of injury, it is recommended to use a hoist to lift this water heater.

2.Lift from four lifting points.

3.If the water heater is to be moved a short distance, the hoist can be positioned on the front lifting points, and the back lifting points can be hand lifted.

Back Lifting Points

Long Term Storage

During cold weather, store the water heater indoors and move it outdoors before starting. Follow these instructions to prevent the heat exchanger coil from freezing during storage.

Winter Storage:

Items needed: 12” piece of garden hose or equivalent, funnel and RV antifreeze (approximately 2 gallons).

1.Attach the water heater’s inlet hose to the high pressure outlet of your pressure washer.

2.Attach the garden hose with funnel to your pressure washer’s pump inlet (see illustration).

3.Pour RV antifreeze into the funnel.

4.Turn your pressure washer on. Do not turn on the water heater.

5.Let your pressure washer run until antifreeze comes out of the high pressure outlet of the water heater.

6.It will take about 1.5 gallons of antifreeze to fill your pump and the heating coil.

7.Disconnect the water heater’s inlet hose from the pressure washer and reconnect it to the outlet of the water heater.

8.The water heater is now prepared for long term storage.

RV Antifreeze

Funnel

Hose

Water Inlet

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents M157494H Important Safety Instructions Table of ContentsGrounding Instructions Extension CordsPower Requirements SpecificationsDimensions Machine Component Identification Description Ref #Installation Instructions UnpackHardware Bag To attach wheels II. Assembly InstructionsHex Nut Jam Nut X 3.5 Hex Bolt IV. Venting III. Getting StartedOil Burner Operating Instructions Pre-OperationII. Check Your Water Supply III. Connect Your Pressure WasherVII. To Clean IV. To StartTurn Your Pressure Washer on VI. Turn The Water Heater onSafety Relief II. High Temperature LimitSafety Relief High Temp LimitMaintenance Instructions VII. Coil Descaling VIII. Coil DesootingNuts IX. ElectrodesElectrodes Moving and Handling Instructions Long Term StorageManeuvering Your Water Heater II. Lifting Your Water HeaterTroubleshooting Guide 157494H 157494H PART# Description QTY

157494 specifications

Northern Industrial Tools 157494 is a high-performance air compressor designed to meet the demands of both professional and DIY applications. Known for its durability and efficiency, this compressor stands out in the crowded market of industrial tools. One of the primary features of the Northern Industrial Tools 157494 is its robust construction, which includes a heavy-duty pump that ensures long life and reliable performance. The compressor is equipped with a powerful motor that delivers a substantial amount of air pressure, allowing it to tackle a variety of tasks, from inflating tires to powering pneumatic tools.

One of the key technologies utilized in the Northern Industrial Tools 157494 is its oil-lubricated pump system. This technology enhances the lifespan of the compressor by minimizing wear and tear, ultimately providing a quieter and more efficient operation. The oil-filled pump also ensures optimal cooling and lubrication, which are crucial for maintaining performance during extended use. Additionally, the compressor features a two-stage design, which increases its efficiency and output, allowing for faster recovery times between cycles.

The Northern Industrial Tools 157494 boasts an impressive air delivery rate, providing users with the necessary airflow for high-demand applications. This feature is particularly beneficial for professionals in construction or automotive industries, where quick and reliable air supply is essential. The compressor also comes with a large, easy-to-read pressure gauge that allows users to monitor the output pressure effortlessly, ensuring that they can make real-time adjustments as needed.

In terms of portability, the Northern Industrial Tools 157494 is designed with user convenience in mind. It is equipped with sturdy wheels and a handle, making it easy to transport from one job site to another. This feature is especially valuable for those who need to move the compressor frequently without compromising on stability or balance.

Overall, the Northern Industrial Tools 157494 represents an ideal blend of power, efficiency, and portability. Its advanced technologies, durable construction, and high air delivery make it a leading choice for professionals and hobbyists alike, ensuring that it can meet a wide range of industrial and home improvement tasks with ease and reliability.
Top Page Image Contents