Nilfisk-ALTO 530cc manual HOW to Replace Brush Roll Belt

Page 18

Retainer Bar

Varilla reten

Corde á piano

Fan Cover

Cubierta del ventilador

Couvercle du ventilateur

Brush Roll

 

Bottom Plate

Cepillo Giratorio

Tapa Rodillo

Brosse tournante

 

Cache rouleau

Fig. 12

 

 

Motor Nut

 

 

Tuerca del

Motor Cover

 

ventilador

Cubierta del

 

É crou du

motor

 

moteur

Couvercle du

 

 

moteur

 

 

Belt

Banda

Courroie

Fig. 13

HOW TO REPLACE BRUSH ROLL BELT

NOTE: Turn off the switch and unplug the electrical cord before replacing belt. Belt can become hot during normal use. To prevent injury, avoid touching the belt and motor nut when it is hot.

CAUTION: Improper installation of the brush roll or brush roll belt could cause carpet cleaner damage.

1.Push handle release and lower handle; push the height setting to th lowest position. Turn the vacuum cleaner so the underneath side and brush roll face toward you. (Fig. 12)

2.Remover retainer bar by pushing downward on the right end, until it unhooks. Release other end.

CAUTION: While pushing one end of retainer bar, hold the machine down to avoid tilting.

3.Remove bottom plate and fan cover by lifting off from motor. (Fig. 13)

4.Remove belt from motor nut. Pull brush roll up, remove belt from brush roll and change with a new belt.

5.Insert brush roll making sure the tabs on the edge of bearing support are facing upward. Bristles on brush roll must form a "V" facing toward you.

6.Twist the belt towards the right and place around motor nut. The higher end of the belt must be on the right side, and the lower end on the left side, as shown in the drawing below (Fig. 14). Rotate brush to ensure belt is positioned correctly.

Low side of belt

 

 

High side of belt

Posicion baja de la

 

Posicion alta de la

banda

 

 

banda

Position basse de la

 

 

Position haute de la

courroie

 

courroie

 

 

 

Fig. 14

Page -18-

CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 530 / 530cc Clarke Technology 530 Upright Vacuum Operators Manual Clarke Technology 530 Upright Vacuum Operators Manual Clarke Technology 530 Upright Vacuum Operators Manual Important Safety Instructions Advertencias Improtantes Mesures DE Sécurité Les modéles destinés á des usages commercialGrounding Instructions Instrucciones Para LA Conexion Electrica DE LA MaquinaAvertissement Un coducteur Instructions Visant LA Mise a LA TerreLista DE Partes Liste DES Pieces HOW to Assemble Como Ensamblar Comment Lassembler HOW to USE Como Utilizarse Accessory See page 7, #4 Opcional- pagina 7, #4 Optionel page 7, #4HOW to Replace Brush Roll Belt Como Reponer LA Banda DE Cepillo Giratorio Important Disconnect machine before replacing motor Important débranchez lappareil avant de remplacer le moteur Page Alto Product Support Branches Clarke Technology Warranty Highway 265 Springdale, Arkansas530 / 530cc Clarke Technology 530 Upright Vacuum Operators Manual Final Test for Product Safety Replacement ProceduresTo Disassemble the Motor Clarketechnology Upright Vacuum External Parts 7/99Description Qty Upright Vacuum Internal Parts 7/99 Upright Vacuum Internal Parts 7/99 Description Qty Upright Vacuum Motor Assembly 7/99 Trouble Shooting Guide Problem Possible Cause Solution Upright Vacuum Wiring Diagram 8/98Clarketechnology Alto Product Support Branches Highway Springdale, Arkansas

530, 530cc specifications

The Nilfisk-ALTO 530cc and 530 are versatile and powerful pressure washers designed for both commercial and residential use. Known for their exceptional cleaning capabilities, these models provide reliability and efficiency, making them a popular choice among users who require extensive cleaning power.

One of the main features of the Nilfisk-ALTO 530 series is its robust design, which ensures durability and long-lasting performance. The units are constructed with high-quality materials that can withstand demanding cleaning tasks, making them suitable for various environments, including industrial sites, garages, and construction areas.

The 530cc model is equipped with an impressive 2.1 kW motor, delivering a high-pressure output which can reach up to 150 bar. This powerful motor allows the user to tackle tough dirt and grime with ease, ensuring effective cleaning results every time. Additionally, the 530 offers adjustable pressure settings, enabling users to customize the water pressure according to the surface being cleaned, whether it's delicate car paint or robust concrete.

Among the notable technologies incorporated into the Nilfisk-ALTO 530 series is the automatic stop and start system, which enhances energy efficiency and prolongs the motor's lifespan. This system ensures that the motor operates only when needed, consuming less energy, a vital feature for environmentally conscious users.

Another standout feature of the 530 series is the inclusion of a high-quality pump designed for optimal water flow and pressure consistency. The aluminum pump housing contributes to the lightweight nature of the unit, allowing for easier handling and maneuverability during use.

The 530 series also offers a variety of accessory options, including different nozzles and brushes, which help users achieve the best possible cleaning results across different applications. The integrated storage for these accessories ensures they are easily accessible when needed.

In summary, the Nilfisk-ALTO 530cc and 530 pressure washers exemplify the combination of power, durability, and efficiency. With their robust construction, powerful motor, adjustable pressure settings, energy-saving technologies, and extensive accessory compatibility, they are equipped to meet the most demanding cleaning tasks with ease, making them a reliable choice for professionals and homeowners alike.
Top Page Image Contents