HOW TO ASSEMBLE THE MACHINE
CAUTION!
On delivery, the accessories - are lying in the tank and must be removed before the machine is used for the first time. See figure 2.
To assemble the machine, remove the machine top section:
The power cord must not yet be inserted into a plug socket.
1.Open the retaining clamps and lift off the machine top section (Figure 3).
2.Place a
3.Fit the machine top section back on the tank, and close the retaining clamps.
4.Connect the suction hose. The "Wap Multifit" enables any Wap Technology suction hoses (27, 32, 36, 50 mm diameter) to be connected to the machine (Figure 4).
MACHINE OPERATION
Picking Up Dry Substances
Before picking up dry substances, the
WARNING: Inflammable substances must not be picked up with the machine!
After picking up liquids, the filter element is damp. Damp filter elements can clog more quickly when dry substances are picked up. For this reason, the filter element should be dried or replaced before picking up any dry sub- stances.
Picking Up Liquids
Before picking up liquids, the
WARNING: Inflammable liquids must not be picked up with the machine!
If foaming is observed, stop work immediately and empty the tank.
Switching On The Machine (C.A.V 15)
Turn the switch to position "I" (Figure 3).
Figure 2
Figure 3
Clarke® American Sanders C.A.V. 15 Operator's Manual | Page |