Nilfisk-ALTO C.A.V. 15 manual Changing The Bag Type Filter, Maintenance and Repair

MACHINE OPERATION

Changing The Bag Type Filter

1.Close the bag-type filter sleeve with the slide (Figure 4).

2.Pull the bag-type filter sleeve off the inlet fitting.

3.Dispose of the used bag-type filter in accordance with the local waste disposal regulations.

4.Place a new bag-type filter into the tank as de- scribed in the instructions printed on the filter.

IMPORTANT!

Push the bag-type filter sleeve completely onto the inlet fitting.

Replacing The Filter Element

1.Switch off the machine and pull the plug of the power cord out of the plug socket.

2.Remove the machine top section from the dirt tank and place to one side with the filter element facing upwards (Figure 5).

3.Unscrew the filter retaining nut (1) and remove together with the retaining washer (2).

4.Pull off the filter element (3).

5.Push on a new filter element.

6.Fit the filter retaining washer and tighten the retaining nut.

7.Dispose of the used filter element in accordance with the local waste disposal regulations.

MAINTENANCE AND REPAIR

CAUTION: Before cleaning and servicing the machine, always remove the power cord.

Carry out only maintenance operations described in these operating instructions. Use only original Wap Technology spare parts.

CAUTION: Do not make any technical modifications to the machine. Your safety could be endangered as a result!

For all other maintenance and repair work, please contact and authorized Wap Technology Service department.

Figure 4

Figure 5

Page -8- Clarke® American Sanders C.A.V. 15 Operator's Manual