Nilfisk-Advance America 12P, 12D, 12S, 15D, 15P, 18D, 15S manual Know Your Machine

1

3 6

15

416

7	18	19	5
			11

8

109

	KNOW YOUR MACHINE
2	As you read this manual, you will occasionally run across
	a bold number in parentheses - example: (2). These

20numbers refer to an item shown on this page. Refer back to this page whenever necessary, to pinpoint the location of an item mentioned in the text.

17	1 Handle
	2 Cord Hook
13
	3 Vacuum Hose
	4 Handle Lock Button
21	5 Dust lid
	6 Carrying Handle
7 Light, Green - Only Double Motor Unit (Dual-versions)
2	8 Light, Red Only Double Motor Unit (Dual-versions)
14	9 Brush Housing
	10 Brush Height Adjustment Knob
	11 Pedal
	13 Wand
	14 Crevice Tool
	15 ”Restricted Airflow Light”
	16 Dust lid button
	17 Main Power Switch
	18 Exhaust Filter Cover
	19 Filter Cover Latch
	20 Power Cord Clamp
	21 Upholstery Tool

2

Insert the handle at the opening at the top of the bag housing, until the button at handle snaps in place.

SET UP AND ASSEMBLY

1.Carefully take out the vacuum cleaner from its carton.

2.Push the Handle (1) into the opening at the top of the Dust compartment until the button at the rod snaps in place and secure the handle to the housing.

Never operate the vacuum cleaner without a Dust Bag in place. These machines are equipped with an "no bag" clip. This means that if a dust bag not is fitted or fitted uncorrectly - the dust lid (5) would not be able to close.

IMPORTANT !

Foot pedal must be used to release base to operating/non operation position. Failure to do so could result in damage to the release mechanism.

8