Nilfisk-Advance America 16XP, 16ST 10 / English, After Using the Machine, Maintenance Schedule

Page 12

A-10 / ENGLISH

AFTER USING THE MACHINE

1Turn the Power Switch OFF (O). Unplug the Power Cord (10). Coil the cord and hang it from the cord hook.

2To empty the solution tank, pull the Solution Drain Hose (15) off the elbow. Direct the hose to a designated waste water “DISPOSAL SITE”. Rinse the tank with clean water. Inspect the solution hoses; replace if kinked or damaged.

3To empty the recovery tank, take the Recovery Drain Hose (12) off its hanger. Direct the hose to a designated waste water “DISPOSAL SITE” and remove the plug (hold the end of the hose above the water level in the tank to avoid sudden, uncontrolled flow of waste water). Rinse the tank with clean water. Inspect the recovery and drain hoses; replace if kinked or damaged.

4Remove the brush, rinse with warm water and remove any built-up string, hair or carpet fibers.

5Disconnect the Recovery Hose (3) from the Recovery Tank Dome Lid (4) and flush with warm water to wash any debris out of the Recovery Hose and Vacuum Shoe.

6Wipe the machine with a damp cloth. Do not use abrasive chemicals or solvents.

7Perform any required maintenance before storage.

MAINTENANCE SCHEDULE

MAINTENANCE ITEM

Daily

Weekly

Yearly

Check / Clean Power Brush

 

 

Check / Clean Tanks & Hoses

 

 

Check / Clean Vacuum Shut-Off Float

 

 

Clean Vacuum Shoe

 

 

Clean “Maintenance” Spray Nozzle

 

 

Inspect & Clean Solution Screen

 

 

*Check Carbon Brushes

 

 

*Have a Nilfisk-Advance service technician check the vacuum motor carbon brushes once a year or after 300 operating hours. The brush motor carbon brushes check every 500 hours or once a year.

IMPORTANT!

Motor damage resulting from failure to service the carbon brushes is not covered under warranty. See the Limited Warranty Statement.

8Store the machine indoors in a clean, dry place with the tank dome lid open. Keep from freezing.

9Place the machine in the storage position. This will prevent the brush from taking a set which will increase the brush life and maintain the performance of the brush.

All models except 18FLX / 18ST - Lift up on the Handle Release Pedal (16) then push the Handle Assembly (19A) forward to place the machine in the storage position.

18FLX / 18ST models - Tip the machine back to lift the vacuum shoe off of the floor, then push in and up on the Brush Pressure Control Knob

(17)until the knob locks into place.

VACUUM SHOE MAINTENANCE

Check the vacuum shoe daily. Remove any built-up string, hair or carpet fibers. See Figure 6. The vacuum shoe can be removed by pulling on the Pin Release (7) and sliding the Vacuum Shoe (8) off. Then disconnect the recovery hose from the shoe.

FIGURE 6

￿

￿￿￿￿￿

￿

A-10- FORM NO. 56041602 - AquaClean/ AX 410

revised 4/05

revised 10/06

Image 12
Contents AquaClean 16ST, 16XP, 18FLX, 18ST AX Table of Contents Ii / EnglishEnglish / A-1 Plug is not Waterproof Keep DRYImportant Safety Instructions EnglishImportantes Mesures DE Sécurité AvertissementConserver CES Instructions English / A-3Grounding Instructions Instructions Visant LA Mise À LA Terre120VAC Grounding Instructions ¡PELIGRO English / A-5120VAC Intrucciones Para Hacer LA Toma a Tierra Instructions Visant LA Mise À LA Terre 120VACKnow Your Machine English / A-7 Preparing the Machine for USE Filling the Solution Tank Before Using the Aquaclean / AXPlan for Cleaning PRE-SPRAYING the CarpetUsing Attachments English / A-9Operating the Machine After Using the Machine Maintenance ScheduleVacuum Shoe Maintenance 10 / EnglishEnglish / A-11 Troubleshooting Inadequate Solution Flow12 / English Tripping the Circuit BreakerPage Ii / Español ÍndiceEspañol / B-1 IntroducciónComponentes Y Servicio Placa DE IdentificaciónInstrucciones Importantes DE Seguridad ¡ADVERTENCIAGuarde Estas Instrucciones EspañolEspañol / B-3 Conozca SU Máquina Español / B-5 Conozca SU Máquina Continuación¡PRECAUCIÓN Pulverización Previa DE LA MoquetaPlanificación DE LA Limpieza Español / B-7 Manejo DE LA MáquinaUSO DE Accesorios Kits DE Suelo Duro¡IMPORTANTE Después DE LA Utilización DE LA MáquinaPrograma DE Mantenimiento Mantenimiento DE LA Zapata DE AspiraciónEspañol / B-9 10 / Español Localización DE AveríasDesconexión DEL Disyuntor Mala Recogida DEL AguaPage Page Page Type AX410 EU Prohlášení o shodě 2006

16ST, 16XP, 18ST, AX 410, 18FLX specifications

Nilfisk-Advance America has established itself as a leader in the innovative cleaning equipment sector, delivering machines that meet the diverse needs of commercial and industrial clients. Among their product line, the 18FLX, AX 410, 18ST, 16XP, and 16ST stand out for their exceptional performance and reliability.

The Nilfisk-Advance 18FLX is designed for flexibility and efficiency, offering a robust system suitable for various cleaning applications. With its advanced filtration technology, this model ensures that dust and debris are effectively trapped, promoting a cleaner indoor environment. The 18FLX also features user-friendly controls and an ergonomic design, minimizing operator fatigue while maximizing productivity.

In contrast, the Nilfisk AX 410 is a compact and nimble machine ideally suited for tight spaces. Its advanced suction capabilities make it perfect for both floor and above-floor cleaning tasks. Equipped with a high-efficiency motor, the AX 410 operates quietly while delivering powerful suction performance. This model's lightweight construction makes it easy to transport, enhancing its versatility across different cleaning scenarios.

The 18ST model is known for its powerful performance and durable build, specifically engineered for heavy-duty applications. It incorporates cutting-edge safety features, including automatic shut-off systems to prevent overfilling and potential spills, allowing for uninterrupted cleaning sessions. With its large capacity tanks, the 18ST can handle extensive cleaning jobs without frequent refills, making it ideal for large venues.

The Nilfisk 16XP combines power and convenience, boasting a rugged design that enables it to tackle challenging cleaning tasks with ease. It features state-of-the-art filtration technology to ensure optimal cleanliness in a variety of environments. The 16XP is equipped with intuitive controls that prioritize user comfort, ensuring operators can work efficiently without hassle.

Finally, the 16ST model is engineered for efficiency and durability, featuring a robust construction that withstands the rigors of daily use. It offers excellent maneuverability, making it easy to navigate through crowded spaces while effectively cleaning various types of debris. The 16ST's adjustable cleaning settings and innovative design contribute to a comprehensive cleaning experience.

Overall, the Nilfisk-Advance America lineup, including the 18FLX, AX 410, 18ST, 16XP, and 16ST, reflects a commitment to quality, innovation, and user satisfaction. With advanced technologies and functional characteristics, these models are designed to meet the challenging demands of today’s cleaning professionals, ensuring jobs are completed efficiently and to the highest standards.