Multitech 1777.8/7-10 G3 Grease lubrication figs, Oil lubrication with lip seal fig

Page 17

Multitec

7.3.3.2Dismantling the drive-end rolling element bearings N.B.: The ceramic bearing installed at the non-drive end need not be dismantled in order to remove the drive-end rolling element bearings. If the pump is oil-lubricated, the oil must be drained before dismantling.

- After loosening the grub screw in the coupling hub pull out coupling half with key 940.3.

Grease lubrication (figs. 26 and 27)

-Remove joint ring (V-ring) 411.7.

-Undo bolts 901.1.

-Remove bearing cover 360.1.

Oil lubrication with lip seal (fig. 28)

-Undo screws 914.4 and pull out together with washer 550.10 and O-ring 412.12.

-Remove bearing cover 360.2.

-Pull off sleeve 520.4 with ring 500.1 (tolerance ring) and O-ring 412.11.

Oil lubrication with labyrinth seal (fig. 29)

-Pull out labyrinth ring 423.2.

-Undo screws 914.4 and pull out together with washer 550.10 and O-ring 412.12.

-Remove bearing cover 360.2.

Grease lubrication

Caution

The rotating unit is adjusted axially by means of

 

spacers 551.1. When reassembling the pump

after partial dismantling (bearing or seal replacement), the same spacer discs 551.1 must be mounted on the bearing side to reproduce the original rotor adjustment.

When dismantling keywayed nut 920.6, all relevant positions such as sequence and orientation of the contact face must be marked accordingly, to ensure identical reassembly (see also section 7.4.4).

-Undo nut 920.2 with lockwasher 931 or nut with locknut 920.6, depending on the pump size. To undo the nut, hold onto shaft with key 940.3.

-Pull off sleeve 520.1 with rolling element bearing(s) 320.1. (The shaft is centered in the sleeve without locking device.)

-Remove spacers 551.1, see text above.

Note: Pump versions V, Vx, E, Ex, F, Fx of sizes 32, 50,65 do not have a fixed bearing as this function is taken over by the motor bearings.

On pump versions Multitec V100, 125 and 150 the fixed bearing is located in the support lantern 342. Dismantling and installation shall be performed in analogy with the horizontal versions.

Pump version V, MTC 100/125/150

(grease lubrication only)

Fig. 27

Fig. 26

 

Oil lubrication with lip seal

Oil lubrication with labyrinth seal

Fig. 28

Fig. 29

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Works No Type series High-pressure pumps in ring-section designOperating instructions 1777.8/7-10 G3 Multitec Contents Multitec Index Section Adjusting dimensions for couplingMultitec General SafetyTransport, storage MultitecDescription Product AccessoriesFoundation / Checks to be carried out prior to installation Multitec Installation at siteInstalling the pump/unit Close-coupled pumpsBe tightened to the following torques Tightening torque Aligning the pump / drive Coupling guardThread Strength Drive Non-drive End 100 120 NmMax. permissible pipeline forces material codes 10, 11, 12 Connecting the pipingMax. permissible pipeline forces material codes 20 to Protection against foreign matterSetting the time relay Connection to power supplyVacuum balance line Checking the direction of rotationMultitec Commissioning, start-up / Shutdown Start-up Temperature of the fluid pumpedShutdown Gland packingReturning to service after storage Switching frequencyMinimum flows Density of fluid pumpedBearings and lubrication Multitec Servicing / maintenanceGeneral instructions PumpMotor Oil quality / Oil changeShaft seal Mechanical seal CouplingDismantling the non-drive-end bearings Plain bearing Dismantling the bearingsAxial suction nozzle Radial suction nozzleOil lubrication with lip seal fig Grease lubrication figsOil lubrication with labyrinth seal fig Grease lubricationReplacing the shaft protecting sleeve Removing a double-acting mechanical seal Dismantling the hydraulic system ReassemblyIntermediate bearing bush Intermediate bearing diffuser With the rules of sound engineering practiceSeals Gland packing Reassembly of hydraulic systemStuffing box housing Horizontal baseplate-mounted pump units Mechanical sealsSealing elements Leakage at the mechanical sealTightening the shaft nuts on Multitec pumps Rolling element bearing sizes Grease-lubricated bearings Fixed bearingMTC 100/125/150 Re-adjusting the clearance gaps Maximum clearance gaps Temperature of the rolling element bearingsInstallation and returning to service Radial bearingMultitec Trouble-shooting Pump sizes 32 to General assembly drawingRadial suction nozzle Close-coupled pump up to pump sizeVertical design Pump sizes 32, 50 Pump sizes 100, 125Pump sizes 125 Description List of components525.1/2/4 Spacer sleeve 529Bild Achtung AttenzionKSB Aktiengesellschaft

1777.8/7-10 G3 specifications

The Multitech 1777.8/7-10 G3 is a prominent device designed for the evolving landscape of communication technology. This multi-functional solution becomes essential for businesses and organizations that demand flexibility and reliability in their network infrastructure.

One of the main features of the Multitech 1777.8/7-10 G3 is its support for multiple communication interfaces. This device can handle several protocols, enabling seamless connectivity regardless of the environment. The built-in support for both voice and data services makes it an attractive solution for various applications, from remote offices to industrial settings.

In terms of technologies, the device stands out with its advanced modular design. Users can easily customize the device with different interface cards based on their specific communication needs. This adaptability ensures that organizations can scale their operations without needing to invest in entirely new hardware as their requirements change.

The Multitech 1777.8/7-10 G3 also emphasizes high security and reliability. It implements multiple security features, including encryption and authentication processes, safeguarding sensitive data transmission. These features are particularly important for organizations that must comply with strict regulatory requirements.

Another characteristic of the Multitech 1777.8/7-10 G3 is its robust performance under various operating conditions. The device is engineered for durability and can withstand significant environmental stresses, making it ideal for deployment in less than optimal locations.

Moreover, the integration of VoIP capabilities allows users to benefit from cost-effective voice communication solutions. This convergence of voice and data services streamlines operations and reduces overall costs while maintaining high-quality service.

The user-friendly interface of the Multitech 1777.8/7-10 G3 ensures that system administrators can easily configure and manage the device. comprehensive monitoring and reporting functions enable businesses to keep track of their network performance, ensuring that they can address any potential issues proactively.

To summarize, the Multitech 1777.8/7-10 G3 is a testament to modern communication technologies, combining flexibility, security, and ease of use while equipping businesses with the tools necessary for efficient operations in a rapidly changing digital landscape.
Top Page Image Contents